VVDI MB BGA TOOL

[babeh]

Hello, it is failing the renew process, via IR. Even the vvdi says do not renew this model. It’s an eis without a key, the used one

Did you get key pass and erase pass ?

[srt8]

Did you get key pass and erase pass ?

actually sorry no. so i have to make a new key for this used unit in order to get the key and erase pass?

[srt8]

well, i got the key and erase pass, but again it fails at 95%. several times, still the same.

[babeh]

actually sorry no. so i have to make a new key for this used unit in order to get the key and erase pass?

If you want to swap EIS, of course you have to renew it, then write back your old EIS data to the one you want to swap,
then you can use your old keys.
Still not understand what is needed to do ??

[srt8]

If you want to swap EIS, of course you have to renew it, then write back your old EIS data to the one you want to swap,
then you can use your old keys.
Still not understand what is needed to do ??

Failing, I have done it as I mentioned above. It goes to 95% and stops, failed. I have 2 IR cables and both are failing, the writing process

[babeh]

Failing, I have done it as I mentioned above. It goes to 95% and stops, failed. I have 2 IR cables and both are failing, the writing process

On bench or in car ?

[srt8]

On bench or in car ?

bench only

[Perryking]

Hi, I have W215 with working key and my customer wants another key. So I tried to read obd no luck, IR no luck (read EIS but not password) and VVDI says it cant be renew... So only way is take off EIS, desolder MCU and do manually? Is possible to do reading NEC from working key, get password and do it without remove EIS?

[MBSERVICENORWAY]

hi
im working on a 2001 w220 s500.
want to add a new key for this.
eis is a 1d69j(215 545 00 08) , was not able to get keypassword via ir.

Only working key i have is a Nec v28, can i extract password from key in any way ?

or is only option to order me a hc05 adapter and read it with vvdi prog ?


hope somebody can help me

thanks!

[auto techniek]

Guys


Any way to enable a disabled key for W906?

Vvdi MB can t do it obd.

If renew EZS wil it help?

[daxxer]

Guys


Any way to enable a disabled key for W906?
Vvdi MB can t do it obd.

If renew EZS wil it help?

not help

[ficho]

Guys


Any way to enable a disabled key for W906?

Vvdi MB can t do it obd.

If renew EZS wil it help?

Try IR, need password and dealerHash

[CarCity]

Smart key version 42
The key was detected by the device
But the device is not able to write this type of key ...

[daxxer]

Smart key version 42
The key was detected by the device
But the device is not able to write this type of key ...

your key are new bought by benz dealer, are protected through unique password, only seller know this and can use/programmed them

need reset NEC to factory state, when you will use them normally otherwise no way

[MBSERVICENORWAY]

Hi ��


Is there any keyless go keys that will work for preface 2006 to 2009 w221?
Car have one oem keyless go key v04.
Have tryed with vvdi fbs3 keyless key. But this only work in ignition, not with push start. Only comes "no key detected"

Please help.

Best regards