VVDI MB BGA TOOL

[MBSERVICENORWAY]

Hi ��


Is there any keyless go keys that will work for preface 2006 to 2009 w221?
Car have one oem keyless go key v04.
Have tryed with vvdi fbs3 keyless key. But this only work in ignition, not with push start. Only comes "no key detected"

Please help.

Best regards

I found cg makes universal nec keyless go key. For cars before 2009.

Has any one tried this? Will they work?

[djollie]

Hi
Can i have erase password please.
Thanks
DJ

erase pass.jpg

[xhorse Jay]

what you want erase?sir,in the process will have option to get erase password

Hi
Can i have erase password please.
Thanks
DJ

erase pass.jpg

[xhorse Jay]

I found cg makes universal nec keyless go key. For cars before 2009.

Has any one tried this? Will they work?

we support NEC key,sir.keyless key support too,but if the original key is two battery,need use original factory key.sir

[babeh]

Hi ��


Is there any keyless go keys that will work for preface 2006 to 2009 w221?
Car have one oem keyless go key v04.
Have tryed with vvdi fbs3 keyless key. But this only work in ignition, not with push start. Only comes "no key detected"

Please help.

Best regards

Have you set the correct frequency ?
315 433 MHz

[daxxer]

Have you set the correct frequency ?
315 433 MHz

its not this problem

[autoTkey]

Neither Xhorse nor CG keys will work for older non-BGA cars before 2009.
You need original for those.

[urshul]

we support NEC key,sir.keyless key support too,but if the original key is two battery,need use original factory key.sir

Neither Xhorse nor CG keys will work for older non-BGA cars before 2009.
You need original for those.

Today for the first time I made a key with keyless go on W221 2009.
Used the key *Xhorse VVDI BE Universal Benz FBS3 KeylessGo Smart key*


I have programmed the key, but the keyless function does not work, error: The key is not recognized. At the same time, only keyless does not work (by inserting the key into the ignition lock, the car starts, the doors close/open if you press the buttons). Do I understand correctly that dear * xhorse Jay* and * autoTkey* described this situation? That is, in this car, I must use the original key with two batteries in order for the keyless function to work. And the VVDI keyless key will not work in this car (the keyless function will not work)?

[xhorse Jay]

Today for the first time I made a key with keyless go on W221 2009.
Used the key *Xhorse VVDI BE Universal Benz FBS3 KeylessGo Smart key*


I have programmed the key, but the keyless function does not work, error: The key is not recognized. At the same time, only keyless does not work (by inserting the key into the ignition lock, the car starts, the doors close/open if you press the buttons). Do I understand correctly that dear * xhorse Jay* and * autoTkey* described this situation? That is, in this car, I must use the original key with two batteries in order for the keyless function to work. And the VVDI keyless key will not work in this car (the keyless function will not work)?

yes,the keyless function not work,original car key must have two battery.so you need use benz this car original factory new key to prepare key.

[MBSERVICENORWAY]

EIS.jpg
Hi

I have a w212 eis (without elv)
It wont renew. I think i have renewed same partnumber before.
but i load all data and tryed to renew by ir. but it stops at 90% every time.

Any ideas ?

[ficho]

HI,
Your erase password is wrong if I'm correct ...

[MBSERVICENORWAY]

Thanks will try that erase password. I also sent you a pm��

[MBSERVICENORWAY]

HI,
Your erase password is wrong if I'm correct ...

With your erase pass it renewed it without problem.

is it often vvdi mb dont get the correct erase password ? its the first time for me .

[xhorse Jay]

sir,this EIS is original? i first see this problem too, can you send me your log 、 device SN and car information to my mail:neutrinohu@foxmail.com ,i collect to certain problem avoid latter same accident. thank you.

[MBSERVICENORWAY]

hi i sent you a pm