fiat ducato mileage flashing

[elmassioui]

hi
i have fiat ducato 2010 mileage show ------ after read 95040 show in nyo4 399998 km .i change km to 150000 km, after connect dash in car show exact 150000 km but when i start the car the mileage flashing,anyone have any idea ?
thank you

[XmoDDeR]

Is there secondary in ecu ? Or maybe programming voltage ? But most importantly did nyo show actual mileage ? , if not maybe that is the issue.

[elmassioui]

yes nyo show actual mileage

[dorofteius]

Align can with ecuscan.
Work 100%.

[workas]

The second part of millage are in body control unit ,but when you do it with ficom .no problems.

[smartymarti]

Although the. Mileage has change the dump will be slight wrong ie 1-2 bytes
hence flashing have seen this before

[baze007]

hi
i have fiat ducato 2010 mileage show ------ after read 95040 show in nyo4 399998 km .i change km to 150000 km, after connect dash in car show exact 150000 km but when i start the car the mileage flashing,anyone have any idea ?
thank you

Use ecuscan and solve your problem

[vasa]

digiprog3 make this job OBD whitout problem

[baze007]

digiprog3 make this job OBD whitout problem

DigiProg to be corrected km ..... but(flashing) I'm not sure he can make PROXI Alignment

[vasa]

i think is only bad corected sreach eeprom om dk and try this. i did Ducato many times only dash whitout BCM or ecu end never flashing mileage.fiat ducato 95040 _150000.rar
here is dump for try is same as your....

[dorofteius]

I had ducato that made the same thing after correction.
Alingn proxy bi ecuscan, ad everithing back to normal.

[elmassioui]

solved
thank you all

[cavallotv]

Hi, I have exactly the same problem. I have a dashboard 503.001.210.203 1362894080 2 90270. How did you solve it? Can Ecuscan help?

[esse]

Hi, I have exactly the same problem. I have a dashboard 503.001.210.203 1362894080 2 90270. How did you solve it? Can Ecuscan help?

Hi,
yes align proxi with multiecuscan and job done

[cavallotv]

solved using multiecuscan/proxi ,super