I think i will be able to help pls post readed file here.
you write as separate or full ? with full via KTag i will not help.
Hi, today read jetta med17.5.2 with boot kess, made file and start writing... When it came at 99% gives error comunication not present and cant resume at all (tried about 20 times)... I tried writing again but kess cant recognize ECU, made a backup (with corrupted file i tried to write and fail) and notice it is smaller than it should be
It has 27bits less than a normal backup.
Tried to write backup but it cant recognize as med17/5.2 and when i try to write backup it says edc17cp46 and can write the wrong smaller file, but when i try to write a file with correct size it says file is damaged.
Fgtech v53 cant read passou
Ktag cant load pluggin to read or write it
I think i will be able to help pls post readed file here.
you write as separate or full ? with full via KTag i will not help.
All brand FileService - Custom - remapping company
POWER>DPF>EGR>KL>SCR>TVA>DTC's>Lambda>NOx>CustomSp ecialization -
| Diesel | Bosch/Siemens SID/Denso/Delphi/Visteon/Phoenix
Never read an write edc/med17 via OBd!
I wrote only flash, you want backup readed after it bricked?
Yes post it, should be helped bring it to liFe.
All brand FileService - Custom - remapping company
POWER>DPF>EGR>KL>SCR>TVA>DTC's>Lambda>NOx>CustomSp ecialization -
| Diesel | Bosch/Siemens SID/Denso/Delphi/Visteon/Phoenix
IROM and EEPROM
Pro VAG Petrol Tuning | Pro DPF Removal | MED17 TPRot Removal
Hi,
fix your problem whit odis engignering.
Ok. Please send the original readout you did. The file must cover the complete processor including otp area to achieve something.
Here is "FLASH" (IRON) original readed by Kess
Good.
Go find someone next to you with an original Byteshooter v4.0 or a EVC BSL with ADP. Then i will calculate your boot password and you can fix the ecu.
1 QUESTION - is your tools original?
ECU Tuning, DPF and FAP remove,EGR remove, Flap remove,DTC remove,Dyno tested files!!!
Every guy I know around here use Kess, Ktag or Fgtech... I guess only one has byteshooter.
When I try to read password with FGV53 it shows
............
.....
06J906027A..
.......5E.......
.................
BPG-81002.01.12P3H07
02.01.12
13240163
And says "for this news ECU we have no password at moment"
Can someone point me is there is some way to recover it with Kess or FGtech ? There some way to discover the password from file readed in backup by kess ? (by the way what is this format readed in backup with kess ?)
Don?t know if can be of one help, but when I try to write/read (even without the password)
it shows:
CPU ID 0000900001820
int flash ID 0053C001
Bookmarks