Renault Clio II 1.4-16v 2001.03 Sirius 32N need immo off

[rafal]

https://www.digital-kaos.co.uk/forum...enault-Clio-II

[alfons37]

I have buy new ecu, must try

[rafal]

I try your file and work but car go 5 min and car die and engine light go off on dashboard. I have try replace am29f200bb an solder good, solder 12 times I think ecu is bricked

my sloution for you:
to play with ecus is better buy correct tools.............eg. ktag will do this ecu by 10 min without issues and soldering

[alfons37]

Can i read write with ktag?

[rafal]

Can i read write with ktag?

yes.....just you will need soldier one wire for boot..............gray wire with clip in ktag
all in manual..........
https://www.youtube.com/watch?v=p372QAIbyAs

[alfons37]

Thanks Rafal
Its better with ktag

[alfons37]

Now i understand problem, now i use ktag, every file i test say checksum error, only one file work but not correct for this car. I must have correct orginal file with correct checksum.

[rafal]

here set with ori and off

[alfons37]

Strange i try your file and it say checksum error, i have 1.4 16v without can with AC
RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.4 16V (B/CB0P) 2001 98Hk

engine code K4J-712

[rafal]

try this one................

[alfons37]

It say checksum error, maybe is wrong on my install of ktag

[rafal]

i never had problems with this ecus - i done over 40

[alfons37]

Yes, it is very strange with my ktag thanks for your help

[alfons37]

Now i try with emulator and same problem, must be bricked ecu.

[jesmadrid]

here immo off black box sirius 32 cut pin 58 and readyacífico: