XProg-m V5.55 Verify Errors

[marrijonas]

CORRECTION: I just did another complete software re-install & it only blinking works doesn't it.
I uninstalled Adobe Reader, went through the registry & deleted all references to Xprog, deleted ALL files previously installed from the RAR file & i ran remove.bat from the PACTH directory. Extracted all files & foldersagain from the RAR archive into the Program Files directory & re-installed & it has read & verified every time, fantastic !!
Thanks to all who replied with suggestions.

Nogger1

UPDATE: spoke tooo soon, still getting verify errors when i write a file, it seems to verify ok after an erase so looks like i will have to reflash the Atmega.

Hello! the problem comes from virtual Com port setting! Change latency time from 16ms to 1 ms! 100%solution.

I?siųsta naudojantis MX5 Tapatalk 4 Lt

[mikajna]

Hello! the problem comes from virtual Com port setting! Change latency time from 16ms to 1 ms! 100%solution.

Išsiųsta naudojantis MX5 Tapatalk 4 Lt

I need to test that mate, Im hope that will help with verify errors

UPDATE: It look like its solved, but after few reading same verify errors again...

[Gizbern]

After reinstallation software Xprog 555 works about 5 times OK

[spiridonas]

After reinstallation software Xprog 555 works about 5 times OK

i have too this problem.

[Gizbern]

Some sellers in my country (no china) have good 5.55 without dongle
(or can repair Verify Errors)
We don't have good atmega eeprom and flash !

[spiridonas]

The problem with verify errors is the software 5.55 or atmega firmware flash and eeprom ?
Thanks

[Gizbern]

Seller likes to send new processor Atmega (cost 50 Euros)

[jakesman]

had same story with 5.5.5 downgraded to 5.5.1 and used no dongle software with new usb cable and now all running smooth it was ver 5.5.3 with dongle when i got it so i wnt up up and back down 5.5.1 is stable and no problems

[Gizbern]

551 is ok, but can't read SPC560 ect.

[stas12]

Verify error in 5.55 solved!!!Disable internet connection and all OK!!!

[Levanime]

Also,

try 555 no dongle version, works fine
it was on this forum somewhere

[araby80]

hello can anybody confirm stas12 solution (Verify error in 5.55 solved!!!Disable internet connection and all OK!!!)?????

cuase i had made downgrade from 5.55 to 5.51 becuase i faced alot of verify erros..

thanks

[Gizbern]

For SPC560 I use 5,55 without dongle
On other PC, works OK
Sometimes I get information about Virus

[dadal]

555 works fine , without dongle,,to find on DK but dont connect internet,,if you 1 time connect then you must install it again, dont works anymore

[CatalinBN]

Hello,

I'm struggling with my xprog box. I can't find the cd and I don't have the software anymore. Can someone attach the software for a chinese clone?
I was trying downloading it from the internet, but I still get the Safegine error, and it won't start.

Regards,
CD