MK60 ABS long coding for members

[canontronic]

Hi hid3

Coding accepted and ABS working fine. Only ESP dont working and I h've fault "01044 Control Module Incorrectly Coded"
I checked and I have START/STOP SYSTEM and TPMS
Could You change coding with TPMS and START/STOP SYSTEM?
Best regards and Thank You

[hid3]

With start/stop and ABS-based TPMS:
113B200D092A8000880C04E9901A0151350000

[gsmflasch]

I need long coding for following vehicle;


1K0907379AJ
WV Caddy 2010

WV1ZZZ2KZBX218684
Left hnd.drv
1,6 tdi CAY452
75Kw CRDAG7
FWD
Comfortline
ASR/ ESP ON/Off button
PR numbers attached (see picture)

Thank you!

[hid3]

Hello,

try these:
423C400D09230002421102EC901D0061310000
423C400D09230302421102EC901DC061310000

If the codings are too long then remove the two zeroes from the end.
Let me know if it worked and which one worked.

[gsmflasch]

Hello Hid3,

second code was like a briliant, work perfect....

thank you very much!!!

[canontronic]

Hello Hid3
Everything working perfect
Thank You Very very much!!!

[user2468]

Hi pls. need long coding for this ABS module car didn't have pr code because car was in water
WV Golf6 2010
Chassis Number: WVWZZZ1KZAP007309
Engine code: CBA
Left hnd.drv
ABS Info.
Control Module Part Number: 1K0 907 379 AP
Component and/or Version: ESP MK60EC1 H45 0107
Software Coding: 000000000000000000000000000000000000
Work Shop Code: WSC 00028
Here is autoscan result
Gateway Installation List: 7N0 907 530
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: Malfunction 0010
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: Malfunction 0010
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
37-Navigation -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: Malfunction 0010
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
56-Radio -- Status: OK 0000
62-Door, Rear Left -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
Tire pressure monitor installed - NO
ESP OFF Button - YES

[user2468]

Hi pls. need long coding for this ABS module car didn't have pr code because car was in water
WV Golf6 2010
Chassis Number: WVWZZZ1KZAP007309
Engine code: CBA
Left hnd.drv
ABS Info.
Control Module Part Number: 1K0 907 379 AP
Component and/or Version: ESP MK60EC1 H45 0107
Software Coding: 000000000000000000000000000000000000
Work Shop Code: WSC 00028
Here is autoscan result
Gateway Installation List: 7N0 907 530
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: Malfunction 0010
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: Malfunction 0010
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
37-Navigation -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: Malfunction 0010
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
56-Radio -- Status: OK 0000
62-Door, Rear Left -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
Tire pressure monitor installed - NO
ESP OFF Button - YES

[user2468]

sorry for the same posts but dont know whats the deal maybe my browser has bug!

[hid3]

Wow, nice tits!

Try this coding:
113B400D09220001880E02E4902200423100

[user2468]

Hi Thank you, code is acepted, but now has this fault code.

Tuesday,21,March,2017,18:50:59:36838
VCDS Version: Release 10.6.0
I-BEK Elektroauto
Address 03: ABS Brakes Labels: 1K0-907-379-60EC1F.clb
Control Module Part Number: 1K0 907 379 AP HW: 1K0 907 379 AP
Component and/or Version: ESP MK60EC1 H45 0107
Software Coding: 113B400D09220001880E02E4902200423100
Work Shop Code: WSC 01357 011 00200
VCID: 80041C8420F
1 Fault Found:


01309 - Power Steering Control Module (J500)
008 - Implausible Signal
Freeze Frame:
Fault Status: 01101000
Fault Priority: 3
Fault Frequency: 1
Reset counter: 6
Mileage: 57521 km
Time Indication: 0
Date: 2118.14.08
Time: 19:48:09


Freeze Frame:
Count: 3
Count: 2
Count: 4096
Count: 8212
Count: 45056
Count: 256
Count: 0
Count: 0

[hid3]

hm.. ABS module doesn't have any bite related to steering wheel.

What is the history of the car? Why was the ABS coding cleared? Was the steering wheel error there before?

[user2468]

Oh maybe because the vin i give you is from the engine ecu but this is not the original car ecu,
this ecu is from another car same and abs unit, original ecu was broken becuse the car was in water
can i give you the original vin from car?
any way now abs lights are off and work fine and no any warning lights on cluster everything is ok.

[hid3]

In your original post, I have noticed that steering assist module initially had some fault:
44-Steering Assist -- Status: Malfunction 0010

You might want to check that module for errors.

Also, the VIN which is required by ABS is taken from Instruments cluster. It seems that the VIN you have supplied is correct, as the coding was accepted. Module does NOT accept coding with wrong VIN. So don't worry about it.

To conclude, your ABS coding is perfectly fine now. Just figure out what's the prob with steering assist and you're done.

[user2468]

Any way Thanks a loot, i will check tomorrow, but in cluster is ok everything!