is it possible , orange hand book/manual, where can i find it?, thanks friends, ;orange clone is 229 usd, how much is the original one?
is it possible , orange hand book/manual, where can i find it?, thanks friends, ;orange clone is 229 usd, how much is the original one?
Orange-5 price is 350 EUR, immo hpx software 300EUR.
tried to read 1d69J with adaptor
failed
claudio35 (11th May, 2016)
I read today 1d69j adapter success
well after resolder joints on hc05 adaptor get a perfect read 169dj
buy original , not expensive for that money,and work everything from a list, have it over 3 years never problem...
daxxer (12th May, 2016), garagetech (14th May, 2016), ngt5 (5th July, 2016)
This is about the findings on the clone not original
next
Thank you for advice, but this threat is for the clone found in market.
Also i'm electronican more than 20 years and i know what work or not with original and clone devices.
My budget is not unlimited, so like most peoples, we can't buy all original we need each time.
No one can use 100% each device he has. When we do this job, we need several device for 1 job.
So, if the clone can make one step that my others cannot do, i'm happy with that.
Importance is at the end, i make my job in time and earn my job money.
That is my expirience and my choice too.
aksimo (15th June, 2016), claudio35 (14th May, 2016), dimet (6th June, 2016), gjuzel (27th December, 2017), hoangtu (30th May, 2016), kronk92 (27th September, 2016), lalaina74 (22nd November, 2017), ph0en1x (27th September, 2016), PierreTheron (27th August, 2020), Rhogan (10th March, 2017), sbakovi (10th November, 2018), Siham (13th May, 2016), Tariel (29th May, 2016)
and in that 3 years how much immo software has been added? They were the first main locksmith tool to write pcf7941 and still only 1 key supported.. just look at the ????? MK3 must have made already.
I couldn't justify the cost of the original but will probably get a clone... maybe if the clone gets some use then might consider getting the original.
At those days ,the enigmatic question is not to choose between clone or original but in how many time you will get your money back and starting to make benefit.
Why we must pay for original tool like tango or O5 when scorpio cannot or are not able to protect their hardware and soft ?Or maybe they do not want to do it? who know!
Look at Tmpro NEVER cracked both HW and SW ,hand have some unique module !
Even updates are no more a problem for clone tool . why original manufacturers off all tool does not make fair price! I own original Upa because price is fair and worth it .
Today the guys who own a TM100 and payed 1/4 of tango price will get the same updates of the guys who payes 1200 Eur for it !! This is sad but this is the reality.
Kind regards Mates !
No thank , no HELP .
Bookmarks