Hyundai ID47 after 2016

[autocentarvu]

Hello!


I have here Hyundai i10 1.0 petrol from 2019 that came to my workshop for immo off. ECU is CPEGP 2.10.1 UDS.I have try to read it with Pcmflash and it reads area 1 and area 2 and "completed unsuccessfully" (it takes only 2-3 seconds to read),have try on Bench and on Car no luck.
Than I was thinking lets try to repair a this car. Car don't have any DTC in any module but when I go in live data on Immobiliser I have:


NUMBERS OF KEY LEARNT: 0
KEY: learnt
ECU Status: VIRGIN


Immo lamp is off (as I know on Hyundai cars when something is wrong with key/immo there is no immo lamp)


Key type is ID47 Blade key


So I was trying to register 1 key that came with car (I don't know history of car and what happened and why there is a VIRGIN state of ECU...)


I have try to read password but no luck


XHORSE OBD tool always some "Error"
Launch Immo "Can not read password"
Autel KM100 "Vehicle model not supported"
All tools have options to learn key/s but asking for password that I am unable to read.


There is bounch of videos on YT of people reading password and key learning on this type of car.This car is 2019 and I have read somwhere here on forum that some guy wrote that Hyundai have done something on cars from second half of 2019 year.


So someone have some idea?
Do I need to buy VIN to PIN and can someone please send me contact details from someone that can calculate PIN from VIN for Hyundai cars after 2016 year?


...or I have bad luck with this tools.I don't have IM508/608 to give a try


...or someone is more familiar with this kind of cars and know what type of memory is in Immo (if it is right place to read a pass) and how to calculate PIN from dump?


Thanks in advance

[Manta1600]

You can't read the pin because the ecu is virgin - looks like someone read it and after that neutralized

Now you can buy pin by VIN or maybe the owner can supply it from Hyundai main dealer

[jodge]

Hello!


I have here Hyundai i10 1.0 petrol from 2019 that came to my workshop for immo off. ECU is CPEGP 2.10.1 UDS.I have try to read it with Pcmflash and it reads area 1 and area 2 and "completed unsuccessfully" (it takes only 2-3 seconds to read),have try on Bench and on Car no luck.
Than I was thinking lets try to repair a this car. Car don't have any DTC in any module but when I go in live data on Immobiliser I have:


NUMBERS OF KEY LEARNT: 0
KEY: learnt
ECU Status: VIRGIN


Immo lamp is off (as I know on Hyundai cars when something is wrong with key/immo there is no immo lamp)


Key type is ID47 Blade key


So I was trying to register 1 key that came with car (I don't know history of car and what happened and why there is a VIRGIN state of ECU...)


I have try to read password but no luck


XHORSE OBD tool always some "Error"
Launch Immo "Can not read password"
Autel KM100 "Vehicle model not supported"
All tools have options to learn key/s but asking for password that I am unable to read.


There is bounch of videos on YT of people reading password and key learning on this type of car.This car is 2019 and I have read somwhere here on forum that some guy wrote that Hyundai have done something on cars from second half of 2019 year.


So someone have some idea?
Do I need to buy VIN to PIN and can someone please send me contact details from someone that can calculate PIN from VIN for Hyundai cars after 2016 year?


...or I have bad luck with this tools.I don't have IM508/608 to give a try


...or someone is more familiar with this kind of cars and know what type of memory is in Immo (if it is right place to read a pass) and how to calculate PIN from dump?


Thanks in advance

i had a similar car. I20 maybe dunno
I bought the pin from code dealer but the car not accepted at all. I had to take out the immo (behind the dash small plastic box) and not a single stuff able to read except the im508. It was readed or did it something with it and after that it was succesfull the learning

[SAMDoctor]

I use Abrites with these Hyundais. From memory, they can get PIN from key. Gave up with Autel / Xhorse with these.

[Manta1600]

I use Abrites with these Hyundais. From memory, they can get PIN from key. Gave up with Autel / Xhorse with these.

Do you have success to read pin code with Abrites on cars with id70 remote key when AKL

for example Ionic Niro i30 Rio Ceed Sportage etc

[SAMDoctor]

Do you have success to read pin code with Abrites on cars with id70 remote key when AKL

for example Ionic Niro i30 Rio Ceed Sportage etc

Haven't had to.

[autocentarvu]

SOLVED


Purchased PIN and programm key/s without problem.

Thank you all!

[kemaster]

SOLVED


Purchased PIN and programm key/s without problem.

Thank you all!

Did you use code broker?