Ok. Because nobody answered, I assume that either nobody is interessted in this topic or that there is no information about this tools. Or maybe no one is willing to help? :|
Anyway, I've recived the tool and I'm trying to get it up and runing.
I can report that it has a FT232R inside and it should be recognized well by windows 7 (see Pic.1).
However, I'm not able to connect to the car/interface
. It doesn't matter if I'm connected to the car or not (or if I disconect the interface from usb/laptop), I only get the error shown in Pic. 2. So, I assume that the PC can't even comunicate with the tool, which is disapointing.
I contacted the seller. Btw. the SW in Screenshoot 2 was offered by the seller, so I expect to get a communication with the interface at least.
I've also tried to reach the interface through putty => nothing, blank window with no output, not even the input-line is shown....
I will also give it a try with different operating systems (in vbox), but I don't expect to get much better results...
Any Ideas?
Or does someone now other cheap/clone tools which would (or can be adjusted/combined to) do the job ?
Thank You all!
Attachment 375280Attachment 375281
Bookmarks