I must have been asleep, when did VAG start using these whiskeyman? Which models were first?
I must have been asleep, when did VAG start using these whiskeyman? Which models were first?
New cars now have
new 9 cut and 10 cut blades
Automat (18th May, 2016)
HU162T(9) used by most VW,
HU162T(10) used by Audi keyless, and Passat.
There are lishi decoders, but no blanks.
A 3d printer program would by Nice.
To make emergency keys!
Automat (18th May, 2016)
Hello,
Today went to Audi A5 2018 locked keys inside and I think my HU162T(10) tool did not enter the lock fully. I couldn't reach the last wafer on the side. Anyone had simillar experience?
if the lock was sunk inside the handle ,then you need the new gen 2 tool with reduced shoulder and seperate tension handle to get full insertion .
ninja laser cuts the vag 8 , 9 and 10 cut with the newish V jaw and the 1.5mm cutter .
3d used to sell the HU162t blade , i have about 20 of them from them , but they have no side profile cut in , you need to cut this in .
the 8 cut Hu162t was used on some models from 2014 , the 9 and 10 cut were used on models from 2015 though ive had a golf plus on a 2014 with 9 cut and 2017 models still using hu66 .
Last edited by rapidlocksmiths; 21st May, 2019 at 11:53 PM.
Yes lock was sunk inside the handle but I have lishi without tensioner so I think it's 2nd gen but still I think the tool wasn't fully inserted as I couldn't reach last side wafer.
I have tool like this:
newest-lishi-hu162t10-2-in-1-auto-pick-and-decoder-for-audi-27943.jpg
also take sucker and stick it on window and tie handle up in air to help as the lock faces down the way
Bookmarks