check your obd plug
check your obd plug
w205 07.14 big display.... anyone tried??
Oh and by the way if my post has been at all helpfull
please press the little THANKS tab
hi anyone done 2014 hyundai elantra mb91f06bs? i have 3 options on menu not sure which to use if so can you please help me thanks
Last edited by optimistic; 7th June, 2019 at 01:34 AM.
morrisgauge (9th June, 2019), sagie1zn (26th July, 2019)
Hello friends. I was playing around and plugged in my DSP3 via OBD on a USA version 2001 VW Beetle TDI. Smelecom has only OBD options listed for it on my DSP3. Anyways, I clicked "Read KM" and an incorrect value came up. I backed out of the menu, because I wasn't even programming this car, BUT the odometer displayed the read value (3447). I hadn't programmed it, yet the odom value changed?! Very strange. It starts and all instrument cluster functions are fine. I drove it a few miles, the trip and odometer cycle fine. Has anyone run into this before? I don't do too many VAG vehicles, but I know I've done a few Audi's with my DSP3, plug and play, no problem. I appreciate any info, thanks.
Hello my friends ,
for my first use of DSP3 the device require a code pin , whre can i find this code please ? i have somthing other strange : the touch screen dont allow me to write any digit with or without the pen , is this normal on DSP 3 ?
Thank you for your help
I think it's the last 5 digits of your serial number. something like that either last 4 5 or 6 I don't remember exactly. you should be able to write it with anything with no issue try to bring up the keyboard by hitting the lower right corner where it says large in display I think that's what it say see if that works. post a pic of your device
Sent from my SM-N950U using Tapatalk
Last edited by esx503; 30th June, 2019 at 04:24 AM.
DUSTYDUSTER (2nd July, 2019)
i have dsp3-usaprog, anyone knows which adapter i can use for obd but not on the car, on the bench on the cluster plug, and if there is any color code availaible, for power , ground and CAN lines for smelecom adapter. it didnt come with much instructions. do i have to make my own obd connector? thanks
just checked the site looks like you will have to make one
Last edited by evss; 13th July, 2019 at 11:09 PM. Reason: reread original post
mohdmalik90 (14th July, 2019)
new adapter denso for smelecom avail liske stool conection
Reading is fundamental, asking is easy............................
MileageAudit5 (15th September, 2019)
Bookmarks