t5 edc16u1 dtc remove please

**Tzepy** · 8th June, 2016, 10:41 AM

0281010733flashedc16u1.zip can someoane help me remove dtc p0235 , the car runs fine , i have changed the turbo , map n 75 vaalve, i have check hoses and vacums.etc but stil the same problem after 3500rpm

**drewdom** · 8th June, 2016, 10:57 AM

Check this out,No CS:

**Tzepy** · 8th June, 2016, 11:15 AM

thanks, y wil try and report

**Tzepy** · 8th June, 2016, 02:54 PM

the dtc does not aper anymore but the car stil runs in limp mode at 3500rpm and works again only after swiching off and on again

**bobolin4o** · 8th June, 2016, 04:08 PM

What you have there actually - over or under boost?

**Tzepy** · 8th June, 2016, 04:15 PM

underboost, control limit not reached, but the car run and at mesuring blocks the diference betwen actual and desire is very smal

**Tzepy** · 8th June, 2016, 04:18 PM

but after dtc apears the car runs in limp mode until the ignition is swiched off and on again , whit drewdom file the dtc dont apear but stil runs in limp mode

**bobolin4o** · 8th June, 2016, 04:22 PM

Very small, but exist... How much is exactly?
And what shows the MAF... maybe there is some hole...
File is ori or? I can't find appropriate file to compare...

**Tzepy** · 8th June, 2016, 06:46 PM

first file thet ii posted is ori , 100mb , the dtc aper only at 3500 rpm , i search for holes ther is none , vacums , map, n75 , turbo , etc but is stil the same, limp mode at that dtc can de erase?

**mihaiservice** · 8th June, 2016, 08:36 PM

Hi
Limp mode from DTC dont exist ! also small differences are 20mb not 100mb or more ! the maxim tolerance value for boost are +/- 50mb !

**kospoz** · 8th June, 2016, 10:34 PM

Originally Posted by Tzepy

first file thet ii posted is ori , 100mb , the dtc aper only at 3500 rpm , i search for holes ther is none , vacums , map, n75 , turbo , etc but is stil the same, limp mode at that dtc can de erase?

Until 3500 rpm the car is fine?has power?

**CustomCars** · 9th June, 2016, 07:54 AM

I can disable limp for this problem, but that's no any solution ! Limp mode is for protect engine, if we allow more difference in this condition that's will not help this car driving.
Sorry but i don't trust at maked work.

Log for us this car dynamic at 3 gear from 1500rpm

Replace not check ! -> N75
get turbo from car and check variable geometry working if any problem clean.

Next possible problem driver in ecu.

**Tzepy** · 10th June, 2016, 09:20 AM

the car has power all time , the only problem in that the car runs in limp mode after 3500 rpm, whit drewdom file dhe dtc dos not apear anymore but the car stil gos in limp mode, i have replace n75 valve and turbo , map,map and check vacums ,evreithig but stil have same problem , limp mode can de desambled?