need help toyota corolla 2008 89780-02120

**a2000** · 8th June, 2016, 10:12 PM

hi , i need some help with this.

the car is 0 keys , this is the file of the immo ecu 89780-02120 93c56

i have one tp, i need if someone can put it in file.
thanks in advance!!

corolla 2009 ecu 89780-02120 ori fraga 93c56.rar

IMG_4005.JPG

**guille2016** · 9th June, 2016, 02:57 AM

if you use reset key position wait 18 seconds in a then off and is ready to start

**usman4** · 9th June, 2016, 07:45 AM

key added.....

**a2000** · 9th June, 2016, 04:35 PM

ill try and report.
thanks!

**a2000** · 9th June, 2016, 08:32 PM

i couldnt make it work, its there a immo off or something to make it start? thanks

**rashid01** · 9th June, 2016, 09:14 PM

one of my post there 4d off file plz download it putt in ecu eprm r57 93c56 socond if there is 0 key in immo than car is ready to auto key learn replce 4d transponder then chack it

**a2000** · 10th June, 2016, 10:58 PM

hi rashid01 , i couldnt find in your posts any off file for this ecu, the ecu has a rh56 eeprom and the file that i upload is from the immobox that has 93c56.
can u help me telling me which file i have to put in ecu and which one in immobox? i dont care if immo keeps working i just need it to start.
thank u in advance and sorry i couldnt understood before

**aketokediag** · 11th June, 2016, 06:34 AM

Originally Posted by a2000

hi , i need some help with this.

the car is 0 keys , this is the file of the immo ecu 89780-02120 93c56

i have one tp, i need if someone can put it in file.
thanks in advance!!

corolla 2009 ecu 89780-02120 ori fraga 93c56.rar

IMG_4005.JPG

Please make sure you write my dump back to your eeprom. Have helped you to make your dump in auto learning state. First key inserted in the ignition will be automatically programmed.PASS PM
NOTE: The key should be Texas 4D 67/68 OR ID70.
Regards

**a2000** · 14th June, 2016, 12:46 AM

thank you aketokediag! but i tried it many times, in swap mode also and light keeps blinking and car wont start. tried with a id67 , and id68 also.
its there any other way?? .

thanks!

**aketokediag** · 14th June, 2016, 12:39 PM

Did you use my dump? am very sure my dump should work for your car, because have prepare it to auto-learning mode, except your vehicle have electrical problem. Use ID70.
Regards

**Jnava** · 13th December, 2018, 03:36 PM

amigos buenos estoy intentando abrir el arcoo pero me pide contraseña gracias

**droidwayne65** · 13th December, 2018, 03:57 PM

Originally Posted by Jnava

amigos buenos estoy intentando abrir el arcoo pero me pide contraseña gracias

En inglés/english por favor.

**sfrank22** · 25th August, 2019, 07:43 AM

Hello friends, I have this same problem with Toyota Corolla 2009, can you help me with the password to open the dump file, thank you very much .. regards...