Renault mega DF226 P0120

[Min2xx]

Need help to remove TVA, flaps error and function. Error I can remove in DTC table, but cant remove function, and car still in limp mode
Car Renault Megane II, 1.9 DCI EDC16C36 2006 sw 395740

[Min2xx]

Any one can help?

[Min2xx]

No need free solution, I can pay for it!!!

[kinketotua]

here
unplug tva
--> Attachment 385059

[Min2xx]

Big thanks, but solution not work, after 2-3 starts limp mode and no errors. I tested this solution before. Not Ok

[kinketotua]

you unplug??

[Min2xx]

Ok, will check again tomorrow

[Andr33iy98]

Need help to remove TVA, flaps error and function. Error I can remove in DTC table, but cant remove function, and car still in limp mode
Car Renault Megane II, 1.9 DCI EDC16C36 2006 sw 395740

So, what causes your dtcs df226? It could be cars ecu dead?

[Min2xx]

No, it is TVA error, if car not start, maybe TVA stuck in closed position ?

[Andr33iy98]

it is open all the time.

[Andr33iy98]

If I buy a uch, engine ecu and a card key from the same donor car, car would start with no dtcs if engine ecu was the problem?

[mapino]

Need help to remove TVA, flaps error and function. Error I can remove in DTC table, but cant remove function, and car still in limp mode
Car Renault Megane II, 1.9 DCI EDC16C36 2006 sw 395740

Try this..

let me know if you have succes

[Min2xx]

If I buy a uch, engine ecu and a card key from the same donor car, car would start with no dtcs if engine ecu was the problem?

Seems ecu problem ...