Berlingo 2011 edc17C10 dpf / dtc need help

[DjRomeoR]

Hello,

need help for Citroen berlingo 2011 year 1,6hdi edc17C10 DPF/Fap off and dtc P0460 , P1434 and P1435 turn off .

intflashmicro tc1797 original.rar

Thank you all for help.

[Act Tuning]

HI
Dpf remove or fault will not help you if you have fault of the additve Pump, 1434, you have to remove it from bsi+ecu by configuration,and then apply dpf remove.

[DjRomeoR]

in engine ecu NO FUNCTION for dpf,fap, multiplexe addtive pump turn off :/// only in BSi are i turn off but same all this 3 faults came in :/

so maybe someone can do dpf off and this faulty codes turn off and maybe in cluster not be engine light. Car working good no limp mode only this 3 faults :/

[Act Tuning]

If you remove from bsi is good, here DPF remove and Dtc

[DjRomeoR]

If you remove from bsi is good, here DPF remove and Dtc

1 - write your file
2 - car start's
3 - no faults
!!!!!!4!!!!!!!!!! but - in cluster blinking engine light's

how solve ?

[Act Tuning]

The regular check engine light or the one with !

[DjRomeoR]

when start engine - regular check engine light blinking > I try drive 5km but nothing same no faults and engine blinking :/ maybe bad turn off dtc or dtc?

Flashing-MIL1.gif< when you click on image you see how engine light blinking when i start engine.

[LaraVAG]

you need additve off, not other way.
additve off allways in ECU, not in BSI

[DjRomeoR]

hello , yes this write me before ,but no > additive function in engine ecu , i search with lexia but no configuration function in this ecu only i can :
> gear box,dan blower, some sensor's reconfigurate ,but no multiplexe additive pump - fap function .
So how turn off additive in engine ecu ? me sent file but no result's (no faults engine light blinking) .

[Act Tuning]

Dpf is tested 100%, i done alot of this, but if you have Additve pump fault P1434, it will always return, you have 2 ways only to solve as i said before,
1.you put second hand additve pump, and all be ok and dpf off work.
2.you need to configure very good , to remove fap funcation from bsi+ecu,

if you had just dpf fault the regular 1445, so no problem, in psa the problem come when the pump signaling to the bsi.

[DjRomeoR]

Dpf is tested 100%, i done alot of this, but if you have Additve pump fault P1434, it will always return, you have 2 ways only to solve as i said before,
1.you put second hand additve pump, and all be ok and dpf off work.
2.you need to configure very good , to remove fap funcation from bsi+ecu,

if you had just dpf fault the regular 1445, so no problem, in psa the problem come when the pump signaling to the bsi.

ok i think your file are good ,but how i must configurate ECU > in this ecu no functions about additive pump :/ I tryed old pump , and from other working car second hand pump ,same in engine are P1434-P1435 and i don't understand problem , i thinked it's bad dpf file ,but .... :/ and i can't find solution for this problem

[Act Tuning]

can you give me tv with daigbox connected to the car ?

[mihaiservice]

Dont exist such configuration for all kind of euro 5 psa cars !

[teamtuner]

write dpf off file
disconect conector from aditiv pump
read dtc
send the file from car to tuners to remove dtc from this file
and rewrite the dpf off+ dtc off
job done...all be happy

[Act Tuning]

Dont exist such configuration for all kind of euro 5 psa cars !

why you speaking on something that sure you never did if you said "not exsit", P1434 will not work with dpf remove and dtc, and i done too many for i count them euro5, if you want next time you when you have car like that i can show you how "dont exsit such" will be exsit.