Xbox complete guide to flashing, burning games..updated

**ApolloCreed** · 8th August, 2011, 09:34 PM

Is the switch on the internal board or available externally?

If I want a slim modded is this the only option?

Thanks.

**cunny** · 8th August, 2011, 09:47 PM

Originally Posted by ApolloCreed

Is the switch on the internal board or available externally?

If I want a slim modded is this the only option?

Thanks.

Have a read here about the PCB method

Code:

http://team-xecuter.com/forums/showthread.php?t=67582

And there are 2 unlocking methods on the PCBs, depends on which SPI you have

MXIC is done via the Sputnik method

Code:

http://team-xecuter.com/forums/showthread.php?t=68271

Winbond by kamakaze method

Code:

 http://forums.xbox-scene.com/index.php?showtopic=734170

**ApolloCreed** · 8th August, 2011, 10:20 PM

Ahh I see, that's great thanks!

One final question.. of the 3 different methods above, does any one have advantage over the other? I mean if I could choose a premodded system with any of the above, which should I choose?

**cunny** · 8th August, 2011, 10:30 PM

Originally Posted by ApolloCreed

Ahh I see, that's great thanks!

One final question.. of the 3 different methods above, does any one have advantage over the other? I mean if I could choose a premodded system with any of the above, which should I choose?

If you buy a premodded console, then i dont think you will get a choice on how its modded. I would imagine it will either be sputnik or kamakaze depends on which chip it is, the PCBs are sold out in most places now

**ApolloCreed** · 8th August, 2011, 11:21 PM

Originally Posted by cunny

If you buy a premodded console, then i dont think you will get a choice on how its modded. I would imagine it will either be sputnik or kamakaze depends on which chip it is, the PCBs are sold out in most places now

Seen a slim with 'unlock pcb' advertised which I am assuing is the TX pcb. If this is the case, would this be preferred to the other two?

**cunny** · 8th August, 2011, 11:26 PM

Again it would be personal preference m8, i would say, if the sputnik switch was not installed then it would be the easiest to unlock and lock

**burro08** · 16th September, 2011, 01:45 PM

Hi cunny

If my ninth number in the serial number is 4 doesn't that mean an hatachi drive? Ie un flashable?

Thanks
K

**cunny** · 16th September, 2011, 02:45 PM

Originally Posted by burro08

Hi cunny

If my ninth number in the serial number is 4 doesn't that mean an hatachi drive? Ie un flashable?

Thanks
K

If you mean on the slim, just do a tray comparason to see if you have a liteon or hitachi

**burro08** · 16th September, 2011, 05:41 PM

Originally Posted by cunny

If you mean on the slim, just do a tray comparason to see if you have a liteon or hitachi

Tray comparison??? Whats the diff? Yea its a slim
Sorry for being dumb

Thanks

**cunny** · 16th September, 2011, 05:45 PM

Eject the tray, the look at the picture posted in this post to see if you have the hitachi drive

http://www.digital-kaos.co.uk/forums...51/#post313349

**burro08** · 16th September, 2011, 07:52 PM

Thanks from the 4 pics posted in looks to b the 3rd philips benq / liteon. As it has the plan u shape. With no edges. So must be. Is that type flashable or do I need to get the specific model?

**cunny** · 17th September, 2011, 10:55 AM

Originally Posted by burro08

Thanks from the 4 pics posted in looks to b the 3rd philips benq / liteon. As it has the plan u shape. With no edges. So must be. Is that type flashable or do I need to get the specific model?

You will have to take the drive out and see what it is. Ie 0225/0401 ect. If you can post the revision that would be helpfull.

Currently Liteon 0225/0272 (was 9504)/0401 & 1071 are flashable.

Also you will need to see what SPI is on the PCB as to what method will be used.

See the slim post of this thread for more information