>>>>>>>>>>>>>>CONDOR KEYCUTTERS <<<<<<<<<<<<<

**auto techniek** · 7th May, 2019, 03:59 PM

I think this is the best way to choose the right Hu64 key

Originally Posted by auto techniek

Type hu64 2?

**jodge** · 7th May, 2019, 04:34 PM

which key id is this bmw bike key?
thx
bmw_laser5.jpg

**kleidaras** · 7th May, 2019, 05:20 PM

i think is BW9

**ghostrider72** · 7th May, 2019, 07:08 PM

Originally Posted by auto techniek

I think this is the best way to choose the right Hu64 key

For me it works as decoding on HU64-T. But cutting on 64-2. Not sure why is that but its good so far

**auto techniek** · 7th May, 2019, 07:47 PM

I wil give it a try

I have neven cut a key good at once. Need to try different versions.

**lion0304** · 7th May, 2019, 10:47 PM

Originally Posted by auto techniek

I wil give it a try

I have neven cut a key good at once. Need to try different versions.

If you don't try, you'll never know.

THe only thing diffrent with all these blade is use for diffrent shell. Blade cut is the same.

So what blade you choose? Depend of your key shell.

**dedz** · 8th May, 2019, 02:44 AM

Sometime all not work friend need to decode manually and put result on hu64 3

Envoyé de mon SM-G935F en utilisant Tapatalk

**jodge** · 8th May, 2019, 07:41 PM

Originally Posted by jodge

which key id is this bmw bike key?
thx
bmw_laser5.jpg

Originally Posted by kleidaras

i think is BW9

not supported even thru insta+BT

**kleidaras** · 8th May, 2019, 07:43 PM

Originally Posted by jodge

not supported even thru insta+BT

I have cut only with manual machine. You want cut lost key?

Στάλθηκε από το ATU-L21 μου χρησιμοποιώντας Tapatalk

**WRX 14** · 8th May, 2019, 08:14 PM

Originally Posted by jodge

not supported even thru insta+BT

Have you tried HU58? or is there some difference?

**jodge** · 8th May, 2019, 08:32 PM

Originally Posted by WRX 14

Have you tried HU58? or is there some difference?

just a few

**WRX 14** · 8th May, 2019, 08:38 PM

Originally Posted by jodge

just a few

ah these are internal cut... never seen this one before, just blade i thought look little similar with hu58.

**rob h** · 8th May, 2019, 09:41 PM

The hu64, in your picture, if you doubt, best choose hu64-3.
A Hu64-3 will allign just fine, because the cut closest to the shoulder will work as the shoulder.

**sleepyrz** · 10th May, 2019, 02:55 AM

KA33/x248/km10/kw18

xc-mini machine does not have this key???

cant communicate with machine with instacode as there is no card in the machine forthis key

had to make my own again........

**z786** · 10th May, 2019, 06:47 PM

anbody elses graphics messed up after update? the arrow keys say enlarged letters of keyboard and the key pics look like they need outline cutting out??

on another note which tool cuts new toyota VA8 keys and the new ford2018 blade?