>>>>>>>>>>>>>>CONDOR KEYCUTTERS <<<<<<<<<<<<<

**dustin2014** · 4th December, 2020, 04:08 PM

Does anyone know solution to ERROR CODE 45 on XC Mini .
Thanks

**sleepyrz** · 5th December, 2020, 03:16 AM

Ok guys I'm thinking of updating

I'm on 6.0.3 which seems very stable

Any newer decent versions
610
619
620
622???
20201204_210256.jpg

**didi_du_93000** · 9th December, 2020, 10:52 PM

Hello,

I have always problem when cut key by code on clio mk4 megane Mk3.

Key working but hardly.
And I'm sure about the Cuting code.

With Tapatalk

**MohammedNicos** · 11th December, 2020, 10:54 AM

Originally Posted by u.s

Also good to post on here so other members are aware of any issues.

100% correct !

**trinicolin** · 14th December, 2020, 11:47 PM

Hi guys, is there a replacement parts catalog for this machine. There are some some parts I would want to stock up on.

Sent from my SM-G930F using Tapatalk

**autoTkey** · 15th December, 2020, 07:17 AM

There are a lot of parts on MK3 store. I guess on Aliexpress you can find them too.

**PerryZhang** · 24th December, 2020, 10:27 AM

that means sensor problem, you can do the X Y Z axis test to figure out which axis has issue

Originally Posted by dustin2014

Does anyone know solution to ERROR CODE 45 on XC Mini .
Thanks

**Ecuprog31** · 24th December, 2020, 10:56 PM

Hello
anyone have success with fo21 ?
decoding by eyes or akl with fo21 decoder ?

**u.s** · 30th December, 2020, 02:50 PM

Using Dolphin have issues with cutting HU83 blade, key was decoded using photo, key does work but is hard to turn, have also reported using app.

20201230_122145~2.jpg

**didi_du_93000** · 31st December, 2020, 10:28 PM

Originally Posted by u.s

Using Dolphin have issues with cutting HU83 blade, key was decoded using photo, key does work but is hard to turn, have also reported using app.

20201230_122145~2.jpg

This problem hapen some month ago and resolved by firmware update.
Maybe come-back in new update.

Envoyé de mon LYA-L29 en utilisant Tapatalk

**P&D** · 2nd January, 2021, 11:23 PM

The latest update has fixed the problem 1.49

still no fix for VA2/6

**PerryZhang** · 4th January, 2021, 11:49 AM

Originally Posted by u.s

Using Dolphin have issues with cutting HU83 blade, key was decoded using photo, key does work but is hard to turn, have also reported using app.

20201230_122145~2.jpg

have you update your firmware , this issue should been fixed a couple of month ago .

**u.s** · 4th January, 2021, 04:20 PM

Originally Posted by PerryZhang

have you update your firmware , this issue should been fixed a couple of month ago .

Yes, using fw version 1.4.9 and the following menus: Vehicle Database->Peugeot->All Key Blank->HU83 Extra cut and input bitting and cut key

**Meat-Head** · 4th January, 2021, 09:45 PM

Sorry to bother everyone, just seen a Tweet about key cutting app

no idea if helps this thread or not

https://mobile.twitter.com/FrenchKey...43963454754816