>>>>>>>>>>>>>>CONDOR KEYCUTTERS <<<<<<<<<<<<<

[rob h]

Use the customkeytool! Create your own file. There will be more occasions that the Condor can not deliver.

Yes in usa all of the SUV use the 10 cut for hu100 key
I was told just now that they are working on it
Samic was at AKS 3 weeks ago and they gave him the list of issues to work on

[sleepyrz]

ive been trying to figure out how to make a custom key file but i cant really seem to understand how to enter the information correctly


can anyone make a file for the hu100 8 cut i can modify?

[sleepyrz]

Ok I think I may have figured it out
When I save that file on my computer where does it go???

How can I upload it here

[sleepyrz]

Ok it works but the tip is different

The ramp angles are too steep

Can anyone tell me tip parameters

[sleepyrz]

Alright I think I got that figured out now too

[sleepyrz]

Omg I am having the same problem I had on the Chrysler key where it would miss the bitting on the Nissan da34 now........

[obeids]

Hi there.


I am having problems with the TOY41R (TOYO9). The machine tells you to line up the blank according to the shoulder.
However the machine seems to be sent to the wrong position for all the bits. It cutting too much to the shoulder of the key. All cut are way too back on the key. It's about 1 position too back. I had to then manually cut a section of the shoulder off and trim the front of the key and it works perfects on the lock then.
I tried KEY DECODE with a cut key and see that it is doing the same. The position is off. Also you will notice that on TOY41R the machine does not sense the tip of key as it would do with other keys such as TOY43.

Could somebody please check if their machine also having this problem on TOY41R (TOYO 9).


Another problem is the HONDA HON66. When duplicating the keys it is fine but when cutting according to wafers from locks then I seem to have a problem. The last wafer is usually a full size after which would be for Axis A and AXIS B. However it seems that the Machine doesn't count this wafer and also cuts the key then too Front.

[rob h]

Always mention what type of Condor you have, 007 master, or mini!
What happens if you choose silca DH4R?
The toy41r is a shouldered key, the toy43 not, that is why it does not probe the tip.
For now, a solution might be, creating you own files with the custom key tool.
A trick, start the machines cut session, then after calibrating, pause session, and adjust the blanks position.
Or even before calibration, because this one does not probe the tip.

Hi there.


I am having problems with the TOY41R (TOYO9). The machine tells you to line up the blank according to the shoulder.
However the machine seems to be sent to the wrong position for all the bits. It cutting too much to the shoulder of the key. All cut are way too back on the key. It's about 1 position too back. I had to then manually cut a section of the shoulder off and trim the front of the key and it works perfects on the lock then.
I tried KEY DECODE with a cut key and see that it is doing the same. The position is off. Also you will notice that on TOY41R the machine does not sense the tip of key as it would do with other keys such as TOY43.

Could somebody please check if their machine also having this problem on TOY41R (TOYO 9).


Another problem is the HONDA HON66. When duplicating the keys it is fine but when cutting according to wafers from locks then I seem to have a problem. The last wafer is usually a full size after which would be for Axis A and AXIS B. However it seems that the Machine doesn't count this wafer and also cuts the key then too Front.

[obeids]

Always mention what type of Condor you have, 007 master, or mini!
What happens if you choose silca DH4R?
The toy41r is a shouldered key, the toy43 not, that is why it does not probe the tip.
For now, a solution might be, creating you own files with the custom key tool.
A trick, start the machines cut session, then after calibrating, pause session, and adjust the blanks position.
Or even before calibration, because this one does not probe the tip.

Sorry I have the Condor Mini K3.
When I press the pause it cancels the cutting unlike other keys which pause and you can swap out keys or whatever.
If I create a custom file, would it be saved on the machine or would I have to connect the laptop everytime I want to cut that time key?

[rob h]

Any custom files remains in your machine, until you update.
After any updates, you just need to synchronize 1 time using your customfiles.
Did you try to cut it as a DH4R?

[gokart]

HU136 isn't in the list. Have you already tried to cut it somehow with Condor?

[rob h]

HU136 isn't in the list. Have you already tried to cut it somehow with Condor?

Look on instacode for a similar key, with Same seizes and cuts.
Someting Like va102 ne72

[gokart]

Look on instacode for a similar key, with Same seizes and cuts.
Someting Like va102 ne72

I have already compared with VAC102 and NE72. These have 6 cuts while HU136 has 8 cuts according to Silca catalog.

[siyadk]

has anyone received any update on condor mini.. i believe there was hasn't been an update for almost more than a year. Can anyone confirm??

[gokart]

has anyone received any update on condor mini.. i believe there was hasn't been an update for almost more than a year. Can anyone confirm??

You are right.