>>>>>>>>>>>>>>CONDOR KEYCUTTERS <<<<<<<<<<<<<

[dmp]

Hello Dmp,

My Condor is still giving me the screen calibration problems.
So i can not test this right now. But i have loaded files before.
My machine runs on the latest software, that might be neccecary.

I have recieved the mini condor 1.1.0 custom key tool from support.
Butt have troubles uploading it for you guys. I will try that later on the mini condor thread.

I believe I have the latest software (checked online and says up to date as well).

I'll play around with it a bit more this weekend and see if I can get them to load.


Sent from my SM-G930W8 using Tapatalk

[Romney1]

ok now I have the custom file how do I work out the cuts from my key number instacode doesn't list this blank

[obdmaster]

I have a condor mini , great machine does anyone have the latest software link to update machine? Only problem I've had is cold weather and runners sticking threw lack of use, just a little wd40 job done. Fantastic machine just would like latest software download link. Thanks again for all replies

[PremierD]

Cold weather .... when did you move to Scotland mate ............

[sleepyrz]

ok now I have the custom file how do I work out the cuts from my key number instacode doesn't list this blank

Measure them......

[rob h]

EU21P.jpg

ok now I have the custom file how do I work out the cuts from my key number instacode doesn't list this blank

Here are the measurements

[rob h]

http://condorkeycutting.blogspot.nl/
I have the V1.1.0 but can not seem to get it uploaded here.
V1.1.0 is with custom key tool for the mini Condor.

I have a condor mini , great machine does anyone have the latest software link to update machine? Only problem I've had is cold weather and runners sticking threw lack of use, just a little wd40 job done. Fantastic machine just would like latest software download link. Thanks again for all replies

[paul_12345]

anyone got XC-002?? seems bit overpriced - guess main advantage is the extra token for MB.

[gokart]

Did you have problem with decoding SIP16 (Alfa)?

Otherwise cutting is OK, decoding is total wrong.

[paul_12345]

Did you have problem with decoding SIP16 (Alfa)?

Otherwise cutting is OK, decoding is total wrong.

upload a video... also if you cut a key then decode straight away does it still decode wrong?

[gokart]

I tried with two original keys what I cleaned before decoding. The reading pin touched the keys at the correct positions however all value was far from the correct value.

I was in hurry I hadn't more time to play with it. I will try to decode the new key next time.

[daxxer]

it is have difference with this two blade?
i cut this BE key blade with xc-mini but not open door,i see condor not 100% cuting BE blade
in picture ori nec key and be key
with NEC to NEC blade i not have problem, all is ok

Attachment 436071

all blades from latest BE key type, on your picture right sample i cut as HU64-3 with function "cut by bitting"
and from all orig HU64 blades i read the code with my eyes only, because it is more faster then put the blade to Condor and await for his decoding

DSC08142.JPG

for example this blade is from older black plastic case Year 2001-2006 models and have code 2122455422 understand now ???
but i use latest BE key and choose HU64-3 and write this code, what i read with my eyes manualy and cut with function "cut by bitting"
till now all my cutted blades working in lock at first attempt...

[sleepyrz]

How can I cut hu100 10 cut?

It seems it only has the 8 cut in the menu

[rob h]

Hu100 Opel GM uses only 8 cuts.
So you realy need 10?

How can I cut hu100 10 cut?

It seems it only has the 8 cut in the menu

[sleepyrz]

Yes in usa all of the SUV use the 10 cut for hu100 key
I was told just now that they are working on it
Samic was at AKS 3 weeks ago and they gave him the list of issues to work on