As the title suggests .. a new support thread for the above machines. same rules no talk about prices... all views welcome
As the title suggests .. a new support thread for the above machines. same rules no talk about prices... all views welcome
Last edited by PremierD; 27th July, 2016 at 01:25 PM.
aassfour (28th July, 2016), bram380 (27th August, 2016), CaioW (27th July, 2016), daxxer (29th July, 2016), jack44 (10th December, 2016), kevfield (27th July, 2016), milehighlockdoc (21st November, 2018), P&D (27th July, 2016), Samic (28th July, 2016), Siham (29th July, 2016), smokey08 (29th July, 2016), super jumbe (29th July, 2016), Tagne (27th July, 2016), tunertool (27th July, 2016)
thanks for admin,if user have any technical issue or good advise about Condor machine please post here/PM me.
latest update software for Condor XC-Mini KM02xx and KM03xx series is different,
download link:
AndyCZ (29th July, 2016), CaioW (30th July, 2016), daxxer (28th July, 2016), habbyb (1st November, 2019), InchisNonStop (23rd November, 2016), koyot (28th July, 2016), kyawkyaw (8th August, 2016), lush29 (8th August, 2016), mesut47 (4th June, 2017), Oxidoferroso (29th November, 2022), Tagne (28th July, 2016)
...........
Last edited by buga37; 6th August, 2016 at 06:41 AM.
In case someone is having hard time using the search function of the forum, here are links to the old threads, should you need some old info:
XC007:
http://www.digital-kaos.co.uk/forums...ghlight=condor
XC-MINI
http://www.digital-kaos.co.uk/forums...ghlight=condor
daxxer (29th July, 2016)
how we know is our machine is KM02 OR KM03?
通过我的 T1-701ua 上的 Tapatalk发言
IF I HELPED CLICK "THANKS"
MVP pro,Tango, TMpro, SKP900, X100pro, i80pad, Mbtool, VVDI prog, KD900, Mini900, Ad900, Ts888, Ak500+, AK90, BMW Multitool, Xprog clone, miniprog, ETL, wellon vp380
JeligiGER (21st September, 2023)
has anybody had problems cutting hon66 with the lishi condor? i have cut 2 keys. one by code and the other by decoding original key and still no joy?
kleidaras (18th December, 2016)
Yes I had problems on a Civic.... There are two widthson these, I believe its the O type and the OL type,
if it cuts the neck at the bottom (not the depth cuts but the actual neck where you have no authority)
cuts too much (it wont work ) 02 Jazz fine... 06 CIVIC no good.
now there are two types of HOn66 cuts available on the Condor (but they cut the same)
Also VA2 - the Megane emergency blade,
you need to add depth to this cut,
I add about.35mm and then sometimes have to go back and add more otherwise the key wont fit.
Am I happy with my condor... Yes very much so far.
but you have to figure out the bugs (the update on mine helped a little)
Yamy - are you Birmingham way
Mini KM03:
Today tried to cut HU55P, cutter started to the other direction and cut into the jaw
Countless lockpicking stuff, AVDI Original, Tango, Orange 5, TMpro2, sooo mutch chinese stuffs from FVDI Full through VCDS to Benz key programmers, 3 cats and hopefully still 20 fingers......
Bug in HU56 (Volvo). Condor cut clamp. http://www.digital-kaos.co.uk/forums...=1#post2742706
MAZ24 no cut all bits.
about Volvo HU56R condor machine database the key thickness is 3mm and cutting depth is 1.25mm
but if fact,users key is different, thickness is 2.5mm and cutting depth is 1mm.
so users can use define key data first,named 'HU56R-1_U',later we will find a better solution.
1.connect PC to Condor machine
2.use attached software,sync'HU56R-1_U' to condor machine
3.select 'cut by bitting'---enter'HU56R'you will find HU56R-1_U,then cutting.
other key issue still testing and fixing,if users find machine not work well/find bugs/good advise post here/PM me.
Last edited by Samic; 20th August, 2016 at 03:41 AM.
Hi Samic.
Thanks for reply.
Maybe can you add to firmware second position HU56R-2.5mm in next update?
BR
Fabi
Bookmarks