>>>>>>>>>>>>>>CONDOR KEYCUTTERS <<<<<<<<<<<<<

[paul_12345]

dolphin failed on a jeep CY24.. wouldn't turn the lock.. the angle from the shoulder to first cut is too steep almost 90 degrees.

I went over with a manual machine which didn't touch any of the cuts so they was correct, just took some of the first angle and took a little of the tip, then it worked fine.

[u.s]

Also good to post on here so other members are aware of any issues.

[K1nd3r]

condor mini plus is also so problematic as dolphin?

[keymaker.gr]

hello...on hu58 never able to read and cut..key jumps out of clamp....

[autoTkey]

So what's all this noise about Universal Key Blank from Xhorse?
Anyone seen this thing? I bet it looks like a Honda HON66 blank and it doesn't work for regular double side cut keys.
122099627_3492047487521280_7900797010435965795_n.jpg122494844_3492047777521251_2168648578687414430_o.jpg122897432_3503771043015591_2784238521487652084_o.jpg

[paul_12345]

So what's all this noise about Universal Key Blank from Xhorse?
Anyone seen this thing? I bet it looks like a Honda HON66 blank and it doesn't work for regular double side cut keys.
122099627_3492047487521280_7900797010435965795_n.jpg122494844_3492047777521251_2168648578687414430_o.jpg122897432_3503771043015591_2784238521487652084_o.jpg

Copying of 2m2 tank?

[autoTkey]

I didn't know they have it. It seems like the same thing.

[baboonia]

The feature that was added to cut 2004-2009 Prius emergency keys appears to have been taken away. (see post #765 this thread) why?

[musti418]

6.0.3. works perfectly. have a try

[bermuxa77]

Condor XC-MINI user here.

HU 64 cloning broke both of my probes.

During detection, probe broke while measuring the blade, I replaced with backup blade and it broke exactly the same place.

[Jimmy07]

Done the same broke probe HU64 twice in same place

[bermuxa77]

sad to hear.. Any fix for this?

[autoTkey]

Does conductivity test complete OK? If yes, then it is from the firmware and you need to complain to Xhorse in Xhorse App on your phone....

[comizelu]

Clean the blade before .
Also decoding hu64 doesn't always work so better decode by eye.

Sent from my MI CC9 Pro Premium Edition using Tapatalk

[bermuxa77]

Oh I did not know probe needs conductivity to operate... Original key was rusty, I cleaned it but as it seems not well enough. I get it now. My mistake.