>>>>>>>>>>>>>>CONDOR KEYCUTTERS <<<<<<<<<<<<<

[fabi]

Condor KM02, software 5.1.9. Condor broked 1.5mm cutter when going from left side to right side YM15 key. Mercedes Sprinter.
See https://youtu.be/RHKMVxIxyXA

[jodge]

Condor KM02, software 5.1.9. Condor broked 1.5mm cutter when going from left side to right side YM15 key. Mercedes Sprinter.
See https://youtu.be/RHKMVxIxyXA

yeah it's a well know problem they don't fix like the GT15, live with it

[RG550]

yeah it's a well know problem they don't fix like the GT15, live with it

GT15 also broke cutter like YM15 ?

[dmp]

yeah it's a well know problem they don't fix like the GT15, live with it

Cut left side of key. Stop cutting, flip key and cut left side again and remove before it moves to right side

Sent from my SM-G960W using Tapatalk

[fabi]

HU72R broke cutter like YM15

[sleepyrz]

Cut left side of key. Stop cutting, flip key and cut left side again and remove before it moves to right side

Sent from my SM-G960W using Tapatalk

it calibrates on the key on both sides so.........

wont it cut wrong?

for the second time

[gokart]

it calibrates on the key on both sides so.........

wont it cut wrong?

for the second time

I think so. You have to pull back the key until the cutter passes the center line of the key.

[Weasel3]

Dolph - HU66 - Q7 style.
Update to latest update before cutting.
Smallest cutter mounted. I think it is 1,5mm?

Result:
- Open door - Yes
- Ignition - NO

Cut again with A9, which widens the cut all over - Result - everything is OK.

This one needs fix. Extra time wasted.
Maybe it would be OK with the largest cutter. But did not test.

[sleepyrz]

I think so. You have to pull back the key until the cutter passes the center line of the key.

Yea thats pretty much what i do

Or if i dont want to risk losing a finger......

Just cut one side then use duplicator to cut another key

[sleepyrz]

YM15 ,what is problem of this ?

It doesnt work.....
Try one
It will cut one side of the key just fine and then as it goes over to the second side to cut it

it cuts off the tip of the key or breaks the cutter or rips the key from the Jaw

It has been like this since day 1 with old condor master 007 machine in 2013

Then you make condor xc-mini
It still has this problem

Then you make condor xc-mini km03
It still has this problem

Now we have condor xc-mini plus
It still has this problem

Now you just released Condor XC Mini Plus 2 and battery powered dolphin
It still has this problem both of them

From day 1 this machine has problems that never got fixed


6 machines later and almost 7 YEARS
You still cant cut simple key??????????

[fabi]

It doesnt work.....
Try one
It will cut one side of the key just fine and then as it goes over to the second side to cut it

it cuts off the tip of the key or breaks the cutter or rips the key from the Jaw


It has been like this since day 1 with old condor master 007 machine in 2013

Then you make condor xc-mini
It still has this problem

Then you make condor xc-mini km03
It still has this problem

Now we have condor xc-mini plus
It still has this problem

Now you just released Condor XC Mini Plus 2 and battery powered dolphin
It still has this problem both of them

From day 1 this machine has problems that never got fixed


6 machines later and almost 7 YEARS
You still cant cut simple key??????????

HU72R too

See video:

Condor KM02, software 5.1.9. Condor broked 1.5mm cutter when going from left side to right side YM15 key. Mercedes Sprinter.
See https://youtu.be/RHKMVxIxyXA

[RG550]

It doesnt work.....
Try one
It will cut one side of the key just fine and then as it goes over to the second side to cut it

it cuts off the tip of the key or breaks the cutter or rips the key from the Jaw

It has been like this since day 1 with old condor master 007 machine in 2013

Then you make condor xc-mini
It still has this problem

Then you make condor xc-mini km03
It still has this problem

Now we have condor xc-mini plus
It still has this problem

Now you just released Condor XC Mini Plus 2 and battery powered dolphin
It still has this problem both of them

From day 1 this machine has problems that never got fixed


6 machines later and almost 7 YEARS
You still cant cut simple key??????????

You are absolutely right, "sirius" company...FIX F.... simply key cutting...what to say about VA2, VA6 etc...

[kronk92]

i struggled recently on a va2 for peugeot 107, the decode is wrong but i know this problem is old so input the bittings manually but it cutted it wrong, in the last updates it was cutting ok now no, i wasted so much time and blades, sadly you can't rely on these machines, one update it cuts good the next update no, it is a real mess

[dedz]

Hello nay news for cut megane 3 laguna 3 clii 4?


Envoyé de mon SM-G965F en utilisant Tapatalk

[Weasel3]

i struggled recently on a va2 for peugeot 107, the decode is wrong but i know this problem is old so input the bittings manually but it cutted it wrong, in the last updates it was cutting ok now no, i wasted so much time and blades, sadly you can't rely on these machines, one update it cuts good the next update no, it is a real mess

Yes this right. You need also a machine from a different brand, just to be sure to make the job. Updates sometimes good, sometimes not. But needs to keep reporting, so the bugs can be removed fast as possible.