mickye_dj (22nd September, 2019)
mickye_dj (22nd September, 2019)
I dont think there is VA6 in condor
Va2T on 107 up to 2013.
And I done one today. Decoded and cut perfectly.
Va6 decode by eye and enter manually on va2eh2 card.
I only see these on citroen DS and renaults in my day to day jobs really.
Tools owned -
AD100 PRO, Lonsdor, FVDI 18, FVDI 20, VVDI PROG, VVDI2, VVDI MB
CGDI BMW, SuperVag, Renault ECU tool, OBDstar X300 DP Plus, AUTEL im508
VVDI Mini Keytool, KeyDIY KDX2, SBB, ACDP CAS/KVM
Opcom, VCDS pro, Diagbox, Multiecuscan, Forscan, JLR SDD
mickye_dj (22nd September, 2019)
What changes in 6.0.1 firmware?
so perry
no hope on the ym15???
its only been 6 years
The thanks button is HERE looks like this --->>> THANKS
The DOLPHIN XP-005 key machine.
I can select on IC Cards ?
The same as Sec-E9 machine
Or does this work differently with this machine
regards Bert
Can someone decode this by eyes?IMG-20190926-WA0017.jpg
auto techniek (27th September, 2019)
auto techniek (27th September, 2019)
Dolphin Hu64-3
1,5mm cutter.
Still NOT Ok
My money goes to the next vendor, who actually can make these without problems.
Not funny to be out in the field, to make these. And machine can not do the job.
But hey standard, A9 is not much better. Also failing.
I think Condors are better in this than Miracle.
I did a few without fail but used 2.5mm on Condor Mini. I heard they share the same database.
What was the problem in your situation?
I decoded few of the older keys (HU64), so no problems there. Then took picture of the decoding and manually wrote the coding on HU64-3 and were no problems.
Bookmarks