Hi can anyone tell me the lastest software for the xc 007 master series are updates still available or has everything changed to the mini type cheers
Hi can anyone tell me the lastest software for the xc 007 master series are updates still available or has everything changed to the mini type cheers
Just tested the HU162-10 and it’s not cutting the side cuts on the correct edge, not sure about the 9 or 8 but the 8 does still only have 4 depths
Is there a way to get the data off the condor to modify and sort these problems?
I’ve tried to make my own with instacode and load but it isn’t easy for the side cuts on HU162, I did make the new ford hu101 internal and works ignition fine but door lock only turns one way
I'm still having issues getting my XC-007 working. I just need to load the firmware back onto the machine, but it seems that the firmware doesn't exist on the xhorse server. Has anyone managed to reprogram the machine in this situation using an sd card or using data from their laptop/pc without needing access to data from server? I've had some help from a guy called Samic via Skype and he has remote controlled my laptop a couple of times, but as yet it isn't fixed. The machine has only cut a handful of keys in its life, and This must be a straightforward fix. The laptop update tool enabled me to wipe the ROM in the machine far too easily.
I have been considering buying several key programmers from Xhorse, but this would put me off for life using them again if the machine is not recoverable. Has anyone else had this same issue in recent times? Thanks.
https://www.digital-kaos.co.uk/forum...ta#post2913023
there should more of these files, newer version,
it would be nice to have them here on D.K.
Last edited by rob h; 14th December, 2018 at 11:48 AM.
Today i update my mini with Power Supply Adapter with Battery. Very nice update and very cheap!!!!
I bay it from 3dgroup. i dont know if have other now.
my condor doesnt seem to like the cold, i leave in the van sometimes and gets to 0C overnight in england, sometimes less
gives errors when first decoding or starting, and "clonks" with motor movements a bit,
self test motor movements a few times sorts the issue, what temperature should this machine cope with?
Jobeso66 (18th December, 2018)
Hi
Does anyone cut HU135T key for Kia with Condor? Its not in Condors menu
Thanks
Does anyone know the name of the keyblade for LR Freelander 2005?
Should be NE38 but is not decoding properly.
Bookmarks