Injector Coding 1.9DCI 120

**smirnoff_rules** · 4th August, 2016, 09:49 PM

5.00.8 r2 is stable ,easy menu ,has more coding and adaptions , also has A*toD*ta built into it , only autocom 2013 is real all others cooked rubbish

here u r m8 try it , might need to search for how to install cant find notes right now but even the old ones were the same

found it

copy your autocom f/w into wow's f/w folder ( C:\wow5.00.8R2eng\ac_diagnosis_module\firmware ) and overwrite then you can use both programs without f/w problems

**pulsar2000** · 4th August, 2016, 11:45 PM

Downloading, Cheers, will give it a try

**chrisl87** · 10th August, 2016, 12:29 AM

hi again peeps

im now looking for a flasher tool ive been looking at the Galletto V54 but i am also looking at the SMPS MPPS V13 would the MPPS do the job for reading and writing ?

**pulsar2000** · 10th August, 2016, 08:35 AM

FGTECH any time, mpps limited, doesnt cover Fords.
mpps will do your Renault tho,,,
depends on why you buy, if your looking just to do your car mpps, if you want to cover all angles and better range of ecu`s go with fgtech,
also fgtech BDM and Boot mode,
Mpps OBD only

**karol123** · 10th August, 2016, 01:16 PM

Hi.
I have a question.

If I use mpps to RENAULT 1.9 DCi EDC16(read/write) ,is also gotta save injector coding before?

**vladanr** · 10th August, 2016, 01:36 PM

hi,only way to get codes back is that someone send you injectors codes read by galeto ,than you write that file by galeto ,and thats all ,than you can change codes with any diagnostic or you dont have too change ,it is bosch injectors and every are similar.other way is that you read with galleto ,options injector code ,not flash ,on some other 1.9 dci and again write it by galleto in your ecu .I have file but cant send you before monday

**Babos** · 10th August, 2016, 02:14 PM

Not all that help! i see few times not kess not fgtech cant to write back injectors.
there is one way to do all manual

**pulsar2000** · 10th August, 2016, 07:31 PM

Originally Posted by pulsar2000

FGTECH any time, mpps limited, doesnt cover Fords.
mpps will do your Renault tho,,,
depends on why you buy, if your looking just to do your car mpps, if you want to cover all angles and better range of ecu`s go with fgtech,
also fgtech BDM and Boot mode,
Mpps OBD only

Oh yes,,, Forgot to mention , you will lose inj codes mpps ,for sure,
Babos is correct, only way is manual for sure, But good quality kess use Tool option to backup or Fgtech inj code read to backup....write etc
Forget the $15 mpps. mate

**chrisl87** · 11th August, 2016, 02:37 AM

ive ordered the MPPS V13 metalbox version :s but as previous when i lost codes and with me now having my delphi / can clip ill be fine just reprogramming them back in with either one of them wont i ?

**alladdin** · 22nd October, 2016, 03:05 PM

Originally Posted by smirnoff_rules

5.00.8 r2 is stable ,easy menu ,has more coding and adaptions , also has A*toD*ta built into it , only autocom 2013 is real all others cooked rubbish

here u r m8 try it , might need to search for how to install cant find notes right now but even the old ones were the same

found it

copy your autocom f/w into wow's f/w folder ( C:\wow5.00.8R2eng\ac_diagnosis_module\firmware ) and overwrite then you can use both programs without f/w problems

Hi smirnoff

i downloaded and am trying to install , i now think its asking for installation path but its in what appears to be greek - does this mean i hve wrong file or once installed will it be the eng version ?
cheers and apologies for being a pain

**smirnoff_rules** · 22nd October, 2016, 03:14 PM

just press enter m8 unzip is different but install is english

if its asks for pass its

PASSWORD = motordig

**alladdin** · 22nd October, 2016, 04:09 PM

ok, think i guessed my way through it

i did get a dos error and no desktop shortcut but so far it seems to be in ok...........

**luca22** · 22nd October, 2016, 04:54 PM

Originally Posted by Babos

Not all that help! i see few times not kess not fgtech cant to write back injectors.
there is one way to do all manual

Hello Friend

My oryginal KESS do that ecu without problem, tested many times and no need to read inj codes...

Regards
Luca

**alladdin** · 22nd October, 2016, 05:05 PM

thanks for the link and reply , its appreciated.
apart from the 1st glitch the only part i am not 100% of is note 11, activate the following switches
i get the part of switching your generated digit pairs into the string but not sure which string to enter - the one in photo (i used this) or all 4 from note 11 ?

i switched in the 1430 FW and its worked so far to update my 100e chinese vci and read 07 fiesta as a test.

cheers