X-Prog M

[another_seller]

Do you have a link mate? so all our friends can check it out.
Do you own this company.Or you on a percentage of what you can sell?
If you are learning to use these tools then you will be able to give some sort of support, which is good.

hi, m8, sure for support is no problem, let's share experience is OK

[sl4ck]

Are these pictures of your actual product m8, as ive seen them on download from tekionics. Like does your product come in plastic suitcase as original does. And is the picture of the xprog-m a picture of your product. As my clone xprog has two sides where the edges are rounded not at 90 degrees like original. And mine doesnt have the labels on the leds.


Attached are the pictures from tektronics website they look the same as obd2masters, check em out.

M8, does your clone from ECUTOOL has the transport plastic case?

[obdmaster]

M8, does your clone from ECUTOOL has the transport plastic case?

No m8, it doesnt. the one this guy has looks the same as the more expensive one from tektronics m8.


Programmers XPROG-M Programmer

[another_seller]

M8, does your clone from ECUTOOL has the transport plastic case?

hi, M8, clear pic just made from our engineer team, AL case main unit with suit case.

[sl4ck]

hi, M8, clear pic just made from our engineer team, AL case main unit with suit case.

So, what's your site and price for full authorizations and adapters order?

[stevan]

HI, M8, definitely NO, ECUKEY simplay cloner, I can confident enough to make one deal with any guys on the XPROG-M, 1500USD as I said to m8 obdmaster, if our XPROG-M works perfect as TMT, the 1500USD is mine, if no, then money is yours . below pictures share with you.

I you want to say that ECUKEY Xprog ios not ok?
I have order one for testing.

[another_seller]

So, what's your site and price for full authorizations and adapters order?

hi, sl4ck, please refer to Programmer XPROG-m Motorola 68HC05 , 68HC08, 68HC11, 68HC(S)12 XPROG [AS800XPROGM] - €1,234.65 : Store.autosvs.com, or you can refer to our sales staff on prices

[mavi]

i have xprogm 4.5 clone and i work by rs232 with power 12v and all funcions work ok, full autorisation, by
usb many times too low power.

[obdmaster]

i have xprogm 4.5 clone and i work by rs232 with power 12v and all funcions work ok, full autorisation, by
usb many times too low power.

I use mine by usb and 15volt exteral dc power supply works ok

[eepromRipper]

can anybody show real pictures connecting xprog-m to ews? i need to see the connection diagram. i don't what is wrong with my device. thank you

[bricolo]

hi
is this seller good seller and what do you think
about they product quality ?
OBDAUTO--BMW OPS VAG-COM,Tacho Universal,KWP2000,BMW Scanner,BMW Carsoft,ELM323,Code Reader,Can-bus
I want to found a seller able to sell all automotive
product i need ( diagnostic, key programmer, xprog- chiptunning tools.....)
thank

[MS1]

I you want to say that ECUKEY Xprog ios not ok?
I have order one for testing.

Hi did you get your programmer from ECUKEY, I want to buy one from him just want to know if works OK.

[MS1]

hi, sl4ck, please refer to Programmer XPROG-m Motorola 68HC05 , 68HC08, 68HC11, 68HC(S)12 XPROG [AS800XPROGM] - €1,234.65 : Store.autosvs.com, or you can refer to our sales staff on prices

Do you have the ARM Micronas authorisation? and what is your software version? Can your Xprog-M be updated with newers softare?

[obdmaster]

here you can find very good customer service and tech support .sure the quality is most importent.
www.anyscancn.com

but will your xprog-m update m8

[stevan]

Well don't try to update it will damage firmware inside prog.