I have scrambled channels, I would like to check to see if emu is enabled. Can anyone advixe me how to do this? I treid method for the Eurovox max going to language setting and entering 1968 but it just said incorrect pin. Please help I am tearing my hair out.
thanks
lyla
I had problems with downloading the sw but I checked the version and it says kuro 1.1 so I am assuming it's on. I have FTA obviously and then I have all channels listed and information but it says scambled. I was hoping to access the emu but I can't find it.
What's the date of the software - Kuro 1.1 is July 10th
No it says its the 25th of June so I must just have FTA is that KURO as well? I tried to download new firmware to box 3 or 4 times but it gets stuck at 99% for half an hour and I have been told this process takes 3 minutes. I am wondering if its because I am using a USB serial adapter maybe the download is not working but then why would it let me get so far? Can I use an older firmware is this advisable?
yes the preinstalled sw is also kuro lots of people have probs with serial adaptors i use a port replicator with my laptop without any problems
if you have a desktop pc you can always move the box to that and update with the desktop as the box doesnt have to be connected to the tv to update if you do it that way just make sure you dont disconect untill after you get the success mesage.
I am using a desktop and not connected to the tv. I have followed what seems to be simple enough instructions and it is not working. I downloaded the latest software from this site. When I click download it goes to 99% sending and just sticks on that. I keep leaving it for half an hour and nothing is happening. The box says dnld but I don't understand what is taking so long? I was thinking about trying to get the firmware from somewhere else to at least try and see if it makes a difference. I am gutted I don't know what else to try.
pm sent .. well 2 sent
any information provided is for educational/experimental purposes only.
Thanks, but I stay in Scotland. I have tried the factory reset I will try other software and I will try a laptop, see if I get any joy. I have emailed the guy I got it from so I hope to hear from him today.
<--lyla2008 added 1 Minutes and 37 Seconds later...-->
Another thing I was wondering about, when I download the software onto box it says version 2 detected. Is this what it is supposed to say for the Euroxox EX5000?
Last edited by lyla2008; 19th July, 2008 at 11:46 AM. Reason: Automerged Doublepost
It is working. I had used the USB adapter incorrectly. Got it sussed now
Bookmarks