Hello mates,
I'm looking for MPPS V18. There are only 2 variants for the moment ORIGINAL and EURO CLONE.
Clone you can buy for 500EU and ORI for 2500EU.
What can you say about them? Someone use it?
Maybe this tool is crap?
Thanks for comments
Hello mates,
I'm looking for MPPS V18. There are only 2 variants for the moment ORIGINAL and EURO CLONE.
Clone you can buy for 500EU and ORI for 2500EU.
What can you say about them? Someone use it?
Maybe this tool is crap?
Thanks for comments
It depent what you want to read, there is better tools.
CVN FIX Vag/Bmw
Tuning Petrol and Diesel
High Power Maps
Custom Tuning Stage 3+ Hybrid
Dsg Tuning
Kess+Ktag very good on Bosch and Simens, for thoos years, much better.
CVN FIX Vag/Bmw
Tuning Petrol and Diesel
High Power Maps
Custom Tuning Stage 3+ Hybrid
Dsg Tuning
Col19 (16th January, 2020)
Ok, so you can try CMD one of the best tools i have.
CVN FIX Vag/Bmw
Tuning Petrol and Diesel
High Power Maps
Custom Tuning Stage 3+ Hybrid
Dsg Tuning
Col19 (25th November, 2020)
Mpps ori is perfect tool .
Sent from my SM-A510F using Tapatalk
Col19 (25th November, 2020)
MPPS V18 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable
This module adds support for advanced functions on Marelli ECU’s. MPPS covers a range of controllers including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delphi, Siemens, Marelli, Delco, Sagem, Trionic and many others…
MPPS V18 Features:
Read / Write of Micro, Flash and EEprom without using a BDM programmer!
Fiat 6F3 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Fiat 6JF – Full Read / Write Micro and EEprom over K-line.
Fiat 8DF – Full Read / Write Micro and EEprom over K-line.
Fiat 8F2 – Full Read / Write Micro and EEprom over K-line and CAN.
Fiat 8F3 – Full Read / Write Micro and EEprom over K-line and CAN.
Fiat 8GM – Full Read / Write Micro and EEprom over CAN.
Fiat 8GS – Full Read / Write Micro and EEprom over CAN.
Fiat 5SF3 – Full Read / Write Flash and EEprom over CAN.
Fiat 5SF3 – Full Read / Write EEprom over K-Line.
Fiat 5SF8 – Full Read / Write Flash and EEprom over K-line and CAN.
Fiat 5SF9 – Full Read / Write Flash and EEprom over CAN.
Fiat ME7.9.10 – Full Read / Write Micro over CAN.
Fiat ME7.6.3 – Full Read / Write Micro over CAN.
Opel 6O2 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Opel 6O3 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Opel 6JO – Full Read / Write Micro and EEprom over K-line.
This module adds boot mode support for controllers with the tricore processor. Features:
Auto detects ECU and processor type. No need to select from list, everything is automatic!
Read/Write of all memories Eeprom, Irom, Xrom (where possible)
Patch function for OBD Flashing of TPROT ECU’s (supports only VAG at the moment)
TPROT / DS check feature, for testing if TPROT is active without opening ECU.
Supports Bosch upto TP12
Supports Siemens (current only for ECU’s without password protection),
Support for unlocking of VAG Simos PCR and Simos 8.
Checksum Correction supported for Bosch MEDC17.
The MPPS is a powerful programming tool. It offers general reading / writing operations and checksum support, however it also includes some additional features:
Excellent recovery functions. In some cases MPPS can recover ECU’s which others tools can not even make communications with. On certain controllers it even works when with no program is present (a blank memory).
Selectable full / partial reading and writing when the ECU allows this function.
Selectable reading / writing speed.
Writing “changes only” function for faster programming (when supported by the ECU).
Auto detection of K-Line/CAN, and option to bypass and force preferred means of communication.
Temporary bypass of immobiliser to allow flashing on the bench on ME7 systems.
Boot mode support for ECU’s with C167 and ST10 processors.
EEprom read/write functions for some ECU’s are included.
VAG MEDC17 TPROT level checking without opening the ECU.
Last edited by wh1te; 21st October, 2016 at 07:13 AM.
Lol 99 euro on your website but your selling them on ebay for $53.40 pmsl bet pcb is crap
robert1232 (28th July, 2019)
i See the chinese now selling also with Boot adaptor, for no money, anyone tried yet the china v18 ? assume proper v, as has boot cable
its Latest Software version: V18.12.3.8
Try ?42 on the Bay :> China seller Inc del, LOL, From what i can see. looks like the chinese just released this week, come christmas down to ?20 i dont doubt,
as for build quality soon find out, worth a punt for a mere ?40 compared to eu clone @ 350 euros, you never know maybe ok for the money.
Last edited by pulsar2000; 20th October, 2016 at 07:48 PM.
you be the guinea pig bud pmsl !!
Got no expactations whatsoever, Be interesting to see if and how it works Mainly Boot mode Bosch EDC17, got a couple of spare from the scrappy, so see how well if it all it reads / writes, Not using on any customers cars thats to be clear,
Will update as and when i test,
Bookmarks