Hi guys,
i need help, for EGR off ecu denso N8 nissan TD 2500 model 2015,
HW: E30RU4D_T2F0D22014
SW: 5800780
SW_UP: VM11A
ktag reader.
tankyous
Hi guys,
i need help, for EGR off ecu denso N8 nissan TD 2500 model 2015,
HW: E30RU4D_T2F0D22014
SW: 5800780
SW_UP: VM11A
ktag reader.
tankyous
nabilahmed (10th March, 2021), nbg0x1 (23rd September, 2020)
Hi when an EGR delete is done and the EGR is left on site, has the vacuum pipe got to be clamped blocked off or do mappers stop the vacuum to EGR.
Education is not the learning of facts, But the training of the mind to think
So hit the thanks button if I have enlightened you.
hello evrybody... im flashing with kess and ktag on a jaguar xf 3.0 6 cyllinder 240 hp the sw is 503430
i have micro(maps)
extflash
eprom
but no matter how i do the flash
ither the car wont start or the car has a fault on engien when applying gas
how would you flash it
im thinking about with kess 2.53 and flash partial????
im forced to flash car on bench
Alfa Romeo 159 Jtdm 1,9 16v 150hp stage 1Hello Dear fellows please help me with My car Alfa Romeo 159 1.9 JTDm 2006 16v 150hp. Pls disable SWIRL, EGR and DPF (my dpf is phisically out with down pipe) add please add more HP with stage one,km 230,000 and ecu file is read with galetto China clone.Attached Files
Fiat Hardware Number :55205068
Bosch Hardware Number: 0281012144
Bosch Software Number: 1037377871
Bosch Software ID: 3442
ALFA 159 1.9 MJET 16V
Bosch EDC16C39 CF4/EOBD Diesel Injection (1.9, 2.4)
--------------------------------------------------------------
ECU ISO code: FD 86 3D 04 19
FIAT drawing number: 55205068
Hardware number: 0281012144
Hardware version: 00
Software number: 1037377871
Software version: 3442
Homologation number: 93942
ECU programming date: 09/03/2005
hello someone have a link for hardcut limiter for diesel program to download please ?
[QUOTE = maajkii; 3034373] [ATTACH] 451272 [/ ATTACH]
Попробуйте это и сообщите.
Пароль в личку [/ QUOTE]
can I use a password
Why so many passworded files?Please read what Johnner user wrote "Hopefully with the idea that the more experienced guys would help out/teach people new to it ,out...and that the inexperienced guys would report back on their results...which I think is only fair ?"Want to help and teach ? no password ,want to protect your work?need money?go to other topic.Ask for tuned file?here is not the right topic.Why is so hard to fallow few simple rules?
Real engines don't need forced induction
Who needs a turbo when you have a stupidly quick naturally aspirated engine?
Hi can someone who works with tuning VW DSG's tell me what programs they use or any procedures to help me get started? I realize this is an engine tuning discussion but I think the same principles apply in this case.
Hello, I don't know if i'm in the right place to ask this but maybe someone can direct me.
I want to start learning about how to read ecu's, what software and hardware i need to extract the map from the ecu en how to change the map.
Are there any tutorials about ecu-tuning?
Hey. Anyone from experienced colleagues here is able to help with the MED 9.1 RS4 B7 4.2 driver
I need to do Flat shift + Boot routine + Pops & Bang
Last edited by importlive; 1st February, 2021 at 01:36 PM.
I WANT STAGE 1 OR 2 IF YOU CAN
PEUGEO 0281 010166+virgn+1999+107ch.rar
THNX
Hello, can someone explain to me how the pedal map (x axis - % accelerator pedal, y axis - rpm) coefficient works in Siemens SID? For example, if the coefficient is 0.5, what does it refer to? if 1, for what? Up to torque, I suspect, but I don't know exactly how.
Second, why is there a map in Siemens SID that converts IQ to Nm and another that converts Nm to IQ?
Bookmarks