VVDI KEY TOOL

**Maartinj** · 30th January, 2019, 04:53 PM

Originally Posted by sdnatlst

today i tried to clone 48 96bit, transporter 2016 model

the VVDI keytool bleeped as if it was collecting data, but on the APP it was not showing any collections.
usually it says 1 successful, 2 successful etc, but nothing ??

anybody ever have this ?

so how Keytool show collected data , when only one place you can see collected data ......is app, not keytool any longer because screen show BT connection ???
keytool BEEP when recognize signal , and if collected 1 - you need do IGN OFF and ON again to collect 2 ..... then 3..... till 8
did that many times and all was ok

make sure you have good signal detection (use key tool to detect) and place keytool in right place
and then start copy 48 procedure

**sdnatlst** · 30th January, 2019, 05:10 PM

hi, yes thanks i know i have done many before

KEY TOOL was bleeping every time - OK
APP ON PHONE was showing NO collections, every time

KEYTOOL was getting signal fine, because bleep everytime i turn on ignition, app did not respond with any collections, 1 2 3 etc, nothing at all

**keysmith** · 30th January, 2019, 11:05 PM

Originally Posted by ramiz auto lock

Hi can't find that on eBay can you please share a link?
Thanks.

he had 20 units for sale for $20 each shipped but is all sold out, try emailing him his email watermark is in the pic

**ninja123** · 31st January, 2019, 08:28 AM

Originally Posted by sdnatlst

hi, yes thanks i know i have done many before

KEY TOOL was bleeping every time - OK
APP ON PHONE was showing NO collections, every time

KEYTOOL was getting signal fine, because bleep everytime i turn on ignition, app did not respond with any collections, 1 2 3 etc, nothing at all

Are you sure this was ID48 96 bit? Could be AES on 2016

**sdnatlst** · 31st January, 2019, 05:38 PM

Originally Posted by ninja123

Are you sure this was ID48 96 bit? Could be AES on 2016

im not sure - no, but when i checked on which remotes it used, it seemed to show ID48 remotes,

i created a remote with VVDI keytool and the remote programmed in fine, maybe your right, maybe it was a different type

**elektor72** · 1st February, 2019, 08:45 AM

HI
I TRY TO RENEW RENAULT KEY WITH 7961 CHIP
WITH V2.6 RENEW OK I TESTED ON LOGAN 2015 REMOTE OK AND CAR STARTED OK
BUT ALL UPDATE UNTIL V3.0 CAN'T DO THIS
SO I TRY TO DOWNGRATE TO V2.06 WITH UPGRATDE KIT BUT V2.06 DOSEN'T EXIST
IF ANY MEMBER OF FORUM HAVE SOLUTION I'M INTERESTED
PLEASE HELP
THANK's A LOT

VVDIKEY TOOL

**elektor72** · 1st February, 2019, 03:36 PM

ANY HELP PLEASE
I NEED FIRMWARE V2.0.6

**Maartinj** · 1st February, 2019, 04:29 PM

Originally Posted by elektor72

ANY HELP PLEASE
I NEED FIRMWARE V2.0.6

Xhorse is on holliday

send issue http://www.xhorse.uk/issue/
they will look

**elektor72** · 1st February, 2019, 09:44 PM

THANK'S MAARTINJ

**sdnatlst** · 2nd February, 2019, 12:19 AM

will Xhorse ever make MQB key style duplicate remotes? so we can offer customer upgrade to MQB key style

keydiy has these and i would love it to come to keytool

**truedetective** · 2nd February, 2019, 12:57 AM

Originally Posted by sdnatlst

will Xhorse ever make MQB key style duplicate remotes? so we can offer customer upgrade to MQB key style

keydiy has these and i would love it to come to keytool

Yup

xhorse-universal-remote-key-full-1.jpg

**sleepyrz** · 2nd February, 2019, 01:01 AM

buy one and see if it works? could be cross platform compatible?

**sdnatlst** · 2nd February, 2019, 01:18 AM

will buy one and try it, i didnt realise there were come cross platform workarounds, thanks

**nagib** · 2nd February, 2019, 02:52 AM

Originally Posted by WRX 14

No you need buy tokens for cloning, however I believe up until Chinese New Year it is free to use copy48 (where tool has authorisation for this function)

Sent from my iPad using Tapatalk

I think authorisation is for 96 bit id 48. Older id 48 should be free of charge or?

Sent from my VTR-L09 using Tapatalk

**Maartinj** · 2nd February, 2019, 02:12 PM

Originally Posted by sdnatlst

will Xhorse ever make MQB key style duplicate remotes? so we can offer customer upgrade to MQB key style

keydiy has these and i would love it to come to keytool

yep, this year will be loot of new item,

Originally Posted by nagib

I think authorisation is for 96 bit id 48. Older id 48 should be free of charge or?

Sent from my VTR-L09 using Tapatalk

free calculation for 48 96bit is till 25.02.2019
also MB calculation too
That information was post 15th of December