VVDI KEY TOOL

[auto techniek]

Provide the dealer with the VVDI2 serial number and the VVDI KEY TOOL serial number, your VVDI KEY TOOL will have id48 96 bit function. You don't need to pay extra money.

Are you sure?

[Maartinj]

Are you sure?

yes.
if you have VV-04 with VVDi2 , and you have Keytool , you can combinate both device and use COPY 48 on both

[Weasel3]

Licence get automatically updated? In both tools.
When making an account, combining them on the webpage when checking bonus points.
And register the new account, either via phone in CN or email in the rest of the world?
Or need to contact reseller for activating?

[Samic]

Licence get automatically updated? In both tools.
When making an account, combining them on the webpage when checking bonus points.
And register the new account, either via phone in CN or email in the rest of the world?
Or need to contact reseller for activating?

if you already activated 96bit copy48 on VVDI2, just combined both device(VVDI2 and VVDI KEY connected to PC at the same time),
then both can activate.(combine interface in VVDI2-Transponder Programming-Points System)
if only with VVDI KEY TOOL and want to use 96 bit copy48, you have to contact with dealer for activate.

[newone]

Hello Samic,is there going to be any update for remote renew(opel-peugeot)?and if so do you know when?

[cjohny]

Today combine already activated 96bit copy48 on VVDI2, just combined both device(VVDI2 and VVDI KEY connected to PC at the same time),
then both can activate all ok .

[fahmidhassan]

My keytool can't read remote frequency. I've tried so many different remotes but no success it's just showing live oscillation but doesn't change when I press a button on the remote.

Sent from my HUAWEI RIO-L01 using Tapatalk

[WRX 14]

My keytool can't read remote frequency. I've tried so many different remotes but no success it's just showing live oscillation but doesn't change when I press a button on the remote.

Did you hold the remote up against the RF receiver on the top of the tool where 'xhorse' is written? or did you just press buttons while remote is in the vicinity of the key tool?

[MVVL]

The device does not read the frequency. You need to look for a place near the antenna.

[Samic]

Hello Samic,is there going to be any update for remote renew(opel-peugeot)?and if so do you know when?

could you show me the exactly clearly PCB photo, will check and try to add.

[Samic]

My keytool can't read remote frequency. I've tried so many different remotes but no success it's just showing live oscillation but doesn't change when I press a button on the remote.
Sent from my HUAWEI RIO-L01 using Tapatalk

Try to generate a remote by VVDI KEY TOOL, then check whether can detect the frequency.(remove the cover, directly test PCB)

[fahmidhassan]

When I press the remote button I always keep the remote as close as possible to the RF mark in front of the keytool.

Sent from my HUAWEI RIO-L01 using Tapatalk

[newone]

could you show me the exactly clearly PCB photo, will check and try to add.

psa.jpgopel.jpg

[CaioW]

When I press the remote button I always keep the remote as close as possible to the RF mark in front of the keytool.

Sent from my HUAWEI RIO-L01 using Tapatalk

Not in front, the antena is in the TOP.

[fahmidhassan]

Try to generate a remote by VVDI KEY TOOL, then check whether can detect the frequency.(remove the cover, directly test PCB)

It works!! It can detect vvdi remote frequency only? I've tried some other remotes that work on the car but vvdikeytool couldn't detect the frequency.

Sent from my HUAWEI RIO-L01 using Tapatalk