Good morning, i need help for a dump code + immo off Nissan PN-2805F . Thank You for help
Good morning, i need help for a dump code + immo off Nissan PN-2805F . Thank You for help
I could remove secure. code 5353. the radio is not the same vehicle.
Hi friends,
I need help with Nissan HY00E PN2805F.
Please find out the code and disable protection.
Here's my dump from L46:https://www.dropbox.com/s/u3euo0acwh...19%20.bin?dl=0
Thank you very much.
Last edited by josfiala; 10th December, 2019 at 04:08 PM. Reason: add
Your dump has four zeroes 0000 as the code
Try this dump, code 3399, secure off.
This listing has been uploaded. When connected to the car he writes PLEASE INIT. After starting the car, the situation does not change.
There is no way to enter CODE, just PLEASE INIT. Question: is it necessary to register the car radio via a dignostic tool?
What does PLEASE INIT mean? I turned on the radio, the vehicle started. The dump I recorded has SECERE OFF in the title.
What is wrong? Thank you.
josfiala (14th December, 2019)
Notes: / I cannot test the radio in the vehicle now / On the work desk after turning on the radio Writes WAIT after a little while SECURE.
I tried to connect both EQ1 and EQ4 to ground, then both EQ1 + EQ4 to ground. The result is the same. So WAIT and then SECURE.
Next notes : after loading dump from DEXTER / side1 // 24c64 pin7819 ( Off 'Secure' ).rar / and connecting PIN EQ1 to ground, radio writes CODE IN and goes to insert code.
Everything is functional. I hope in the car it will also work with EQ1 to ground. In two days I will have a car, so hopefully this solution will work in the car.
Next notes 2 : after connecting to the car it is also necessary to connect pin EQ1 to ground. Otherwise the radio writes PLEASE INIT. After connecting EQ 1 to ground, it writes CODE IN. / consideration: for another radio you may need to connect another PIN, for example EQ3, EQ4 ... /
Thanks to all for your help .
Last edited by josfiala; 15th December, 2019 at 01:06 PM. Reason: add notes
Bookmarks