BMW MULF repair

[juht]

I have 8 units of BMW MULF modules, most of them year 2004.
Problem is in damaged solderings of BGA and after it - bad software.
Product codes with 6946393, 6953044, 6938943, 9123290, 9116725.
There's Motorola CPU XC540203CZT75, Mask 2J13D.
I know there's most of time hardware problem, can solved by resoldering BGA's. But software is also damaged.
My question is, is there any possibility to read/write thru BDM CPU and external flash 28F128J3C150?
Has anyone done this and what software/hardware used?
I tried to flash via WinKFP, no success, product code corrupt or rebooting all the time.

If BDM connection does not help, is there anybody who has working unit, BGA64 reading possibility and will make me a good working dump for 28F128J3C150 flash(i can read/write flashi with Beeprog2) Or maybe even has it already?

Any help would be great!

[markmich]

99,9% the damage of the content flash 28F128J3C. Only soldering never helps. Checked on a dozen or so pieces.
I enclose the file with the new program. Will heal every MULF. Beeprog in this will help.

I think, that I helped.

[depanatorul]

Hello friend

What type of programmer do you use to read and write 28F128J3C chip ?

Thank you !

99,9% the damage of the content flash 28F128J3C. Only soldering never helps. Checked on a dozen or so pieces.
I enclose the file with the new program. Will heal every MULF. Beeprog in this will help.

I think, that I helped.

[sbalazs22]

Hello

ChipProg-48 or Beeprog2.

[juht]

99,9% the damage of the content flash 28F128J3C. Only soldering never helps. Checked on a dozen or so pieces.
I enclose the file with the new program. Will heal every MULF. Beeprog in this will help.

I think, that I helped.

I test this file, but i dont know 100% how to write that file with Beeprog2, i have adapter but there's too much settings to pick. I test and will post result, still no success

[iulianblb]

99,9% the damage of the content flash 28F128J3C. Only soldering never helps. Checked on a dozen or so pieces.
I enclose the file with the new program. Will heal every MULF. Beeprog in this will help.

I think, that I helped.

My navi frozen when I connect mulf at the car. What do you say? IT same probleme like you?

[kaleval]

Hi, I can't download this rar Someone can send it to me? Interested in repair of MULFs

[rainbows528]

i upload files~

if help ,~ press thanks button,

[MCNexo94]

Please i am have same problem i have 2 MULF no detect in ista just i am read diagnostic using ISTA D after diagnostic ECU MULF dead same problem for old version ISTA for bug FRM3.


I have one programmer Batronix BX48 Batego II and other programmer JTAG Smok and other programmer is possibel post file for connection wire direct in MULF or PINOUT please


Thanks.

[HAMS]

Sorry to open up an old Post.
I have a problem with my bmw e91, the Bluetooth does not work, so I dissasabled the mulf because I have read that resoldering the Flash could help. My question is: can I use the software for the 28F128J3C Flash also for my 28F128J3D75 Flash?

MULF is a 2006 with product number: 84.21 9 - 123290 - 01

[Penzi]

Like to try this too.
Do you program it in a BGA socket or on the board itself?

99,9% the damage of the content flash 28F128J3C. Only soldering never helps. Checked on a dozen or so pieces.
I enclose the file with the new program. Will heal every MULF. Beeprog in this will help.

I think, that I helped.

[Emmy]

Hi every one i have a mulf2 usb unit that turns on and the fiber optic has light coming out , but i cant read aif and i did try to flash with Winkpf or with Expert mode, no luck! any one any idea? i have xprog will that help me in any way to restore it? i need dumps to, but not for mulf1 - i need it for mulf2 high usb. thanks

[Emmy]

hmm=? pls help

[soupy]

I have 8 units of BMW MULF modules, most of them year 2004.
Problem is in damaged solderings of BGA and after it - bad software.
Product codes with 6946393, 6953044, 6938943, 9123290, 9116725.
There's Motorola CPU XC540203CZT75, Mask 2J13D.
I know there's most of time hardware problem, can solved by resoldering BGA's. But software is also damaged.
My question is, is there any possibility to read/write thru BDM CPU and external flash 28F128J3C150?
Has anyone done this and what software/hardware used?
I tried to flash via WinKFP, no success, product code corrupt or rebooting all the time.

If BDM connection does not help, is there anybody who has working unit, BGA64 reading possibility and will make me a good working dump for 28F128J3C150 flash(i can read/write flashi with Beeprog2) Or maybe even has it already?

Any help would be great!

Did you have any luck with repairing this, i'd love to give it a go on mine if it worked for you
(sorry for digging up an old Thread)

[alclot]

Hi mates! Is there any way for read 28F128J3C on board without BGA?
Thanks in advance