You need to post the fault code you have, that someone can help you,
Hello, Can somebody help delete secondary air injection
2.0 VW golf 2005
PN: 06A 906 032 RF
0 261 208 561
Flash memory AM29F800BB
06A906032RF.rar
The engine was replaced and now there is no holes in cylinder head for secondary air injection. Now getting codes and cannot fix it without replacing cyl head.
Thank you,
BE
You need to post the fault code you have, that someone can help you,
CVN FIX Vag/Bmw
Tuning Petrol and Diesel
High Power Maps
Custom Tuning Stage 3+ Hybrid
Dsg Tuning
BestElectrical (1st November, 2016)
What about readiness? is there any way to turn it off and make it N/A?
no, it just need to remove the dtc and thats it,
CVN FIX Vag/Bmw
Tuning Petrol and Diesel
High Power Maps
Custom Tuning Stage 3+ Hybrid
Dsg Tuning
BestElectrical (1st November, 2016)
If i remeber its should be P0410 fault, do you want i remove it for you and try, if you can get dtc
CVN FIX Vag/Bmw
Tuning Petrol and Diesel
High Power Maps
Custom Tuning Stage 3+ Hybrid
Dsg Tuning
BestElectrical (1st November, 2016)
Yes, please. thank you a lot
P0410=Secondary Air Injection System
P0411=Secondary Air Injection System Incorrect Flow Detected
P0412=Secondary Air Injection System Switching Valve "A" Circuit
P0413=Secondary Air Injection System Switching Valve "A" Circuit Open
P0414=Secondary Air Injection System Switching Valve "A" Circuit Shorted
P0415=Secondary Air Injection System Switching Valve "B" Circuit
P0416=Secondary Air Injection System Switching Valve "B" Circuit Open
P0417=Secondary Air Injection System Switching Valve "B" Circuit Shorted
P0418=Secondary Air Injection System Control "A" Circuit
P0419=Secondary Air Injection System Control "B" Circuit
P0491=Secondary Air Injection System Insufficient Flow Bank 1
P0492=Secondary Air Injection System Insufficient Flow Bank 2
P2257=Secondary Air Injection System Control “A” Circuit Low
P2258=Secondary Air Injection System Control “A” Circuit High
P2259=Secondary Air Injection System Control “B” Circuit Low
P2260=Secondary Air Injection System Control “B” Circuit High
P2430=Secondary Air Injection System Air Flow/Pressure Sensor Circuit Bank 1
P2431=Secondary Air Injection System Air Flow/Pressure Sensor Circuit Range/Performance Bank 1
P2432=Secondary Air Injection System Air Flow/Pressure Sensor Circuit Low Bank 1
P2433=Secondary Air Injection System Air Flow/Pressure Sensor Circuit High Bank 1
P2434=Secondary Air Injection System Air Flow/Pressure Sensor Circuit Intermittent/Erratic Bank 1
P2435=Secondary Air Injection System Air Flow/Pressure Sensor Circuit Bank 2
P2436=Secondary Air Injection System Air Flow/Pressure Sensor Circuit Range/Performance Bank 2
P2437=Secondary Air Injection System Air Flow/Pressure Sensor Circuit Low Bank 2
P2438=Secondary Air Injection System Air Flow/Pressure Sensor Circuit High Bank 2
P2439=Secondary Air Injection System Air Flow/Pressure Sensor Circuit Intermittent/Erratic Bank 2
P2440=Secondary Air Injection System Switching Valve Stuck Open Bank 1
P2441=Secondary Air Injection System Switching Valve Stuck Closed Bank 1
P2442=Secondary Air Injection System Switching Valve Stuck Open Bank 2
P2443=Secondary Air Injection System Switching Valve Stuck Closed Bank 2
P2444=Secondary Air Injection System Pump Stuck On Bank 1
P2445=Secondary Air Injection System Pump Stuck Off Bank 1
P2446=Secondary Air Injection System Pump Stuck On Bank 2
P2447=Secondary Air Injection System Pump Stuck Off Bank 2
VAG
BestElectrical (1st November, 2016)
Your file is a bit different to what i'm used to (1.8T) but SAI should be OFF.
Readiness monitor is set to unsupported (VCDS should show PASSED).
However you may have cold start issues because I did not found SAI flow related maps.
Can't find ESCONF either to fix the circuit related DTC's for pump and relay, but will try to do it later.
Test the file and I'll add some improvements later
06A906032RF (VW Golf 4 (SAI OFF) - 371723).zip
BestElectrical (2nd November, 2016)
Thank you for the help.
Here is what I get when I write this dump back into the module.
SAI is still on. I can hear it when I start the car and it is still failing the readiness.
Any other ides?
try this and report
V2
06A906032RF (VW Golf 4 (SAI OFF V2) - 371723).zip
BestElectrical (3rd November, 2016)
here you can try these
unplug pumb
--> Attachment 407929
BestElectrical (4th November, 2016)
sorry friend..I dont have another solution to disable these system. good luck
BestElectrical (5th November, 2016)
OK 3th attempt
MSLUB and CDSLS 00'ed
Keep the SAI relay pluged in and let me know.
06A906032RF (VW Golf 4 (SAI OFF V3) - 371723).zip
Bookmarks