Skoda Octavia 2008, CDC+24c32 add spare key successfully
Skoda Octavia 2008, CDC+24c32 add spare key successfully
mexanico1971 (14th April, 2021), p1et (6th April, 2021)
CLIO 2006 ADD SPARE KEY SUCESS
mexanico1971 (14th April, 2021)
2010 porsche cayenne, non keyless-go, add key fail.
displayed "Immobiliser activated" on the cluster and car shut down.
Luckily I had read out kessy 93c86 beforehand, restored original data, and car woke up.
someone said on this forum that "leave ign on and wait 5minutes".
not work.
habbyb (10th May, 2021)
2013 Toyota Verso add smartkey OK . 2 minute job .
mexanico1971 (14th April, 2021)
Master 2 add key start one time but immo led blinking
then it can’t start
finish job with RET
Tools owned..... Kess3 Master, Bitbox, TGFlash, VVDI2 Full, VVDI Prog, VVDI MB Tool, VVDI Mini Tool, VVDI Key Tool Max Pro, VCX series for BMW Ford Mazda Jaguar Land rover VAG Toyota Volvo GM, PCM Flash + Scanmatik2, Lonsdor K518ise, Magic tank and every other piece of Chinese crap out there.
p1et (13th April, 2021)
megane iv,espace v add ok,5 minutes job
mexanico1971 (14th April, 2021), p1et (13th April, 2021)
So... who’s gonna be the first one to test it?
Weasel3 (13th April, 2021)
Yes that is normal.......immo is still in programming mode.....programe then remove key until led starts blinking before trying to start.
Tools owned..... Kess3 Master, Bitbox, TGFlash, VVDI2 Full, VVDI Prog, VVDI MB Tool, VVDI Mini Tool, VVDI Key Tool Max Pro, VCX series for BMW Ford Mazda Jaguar Land rover VAG Toyota Volvo GM, PCM Flash + Scanmatik2, Lonsdor K518ise, Magic tank and every other piece of Chinese crap out there.
Did they also copy this 😆
Anyone have try akl on trafic 3, twingo 3, smart 453...?
Envoyé de mon LYA-L29 en utilisant Tapatalk
didi_du_93000 (22nd April, 2021), Ecuprog31 (15th April, 2021)
Bookmarks