VAG K + CAN COMMANDER V2. 5

**mafioso3** · 21st September, 2009, 06:06 AM

Diagnostic via CAN and Special functions via K-line.
Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0.
Manual definition of running diagnostic session ????C not like remaining diagnostic tools always standard diagnostic session 0x89. Function is under CAN-TP2.0.
Broadcast diagnostic request ????C disable normal communication, clear DTCs, Logistic (transport) mode,.... Functions are under CAN-TP2.0.
Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Functions are under CAN-TP2.0.
Most of popular diagnostic requests ????C identifications, coding, adaptations, DTCs and s.o. Functions are under CAN-TP2.0.
Special function - odometer correction in instrument clusters and EDC15x.
Special function - read Security Access Code/Login WFS.
Special function - read/program immobilizer data.
Special function - read/write EEPROM from instrument cluster/immobilizer. All supported clusters CAN/K.
Special function - VAG MMI TV Activation.
Special function - Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8,Porsche.
Special function - Key learning buttons for easy usage (not needed security code). Can do component security authorization.
Special function - Key learning Porsche CAYENNE (not needed security code) K+CAN.
Special function - Custom memory reading from different units like ECUs, EZS-Kessy and s.o..
Special function - Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with next update will be possible programming of flash memories
Special function - Crash data clear in airbag units
List of vehicles covered from function odometer change via OBDII:

Audi Q7 (CAN)
Audi A2 (K)
Audi A3 (CAN) up to 2007 !!!
Audi A3 VDO/M73 up to 2003 (K)
Audi A4 VDO/M73 (K)
Audi A4 BOSCH - RB4 clusters (CRYPTO eeproms R/W by OBDII)
Audi A6 VDO (K)
Audi A6 (CAN)
Audi Allroud (K) up to 2004
Audi A8 (K) VDO93xx
Audi A8 (CAN) up to 2007 !!!
Audi TT (K)
Seat Alhambra (K)
Seat Altea (CAN)
Seat Arosa (K)
Seat Cordoba after 1999 (K)
Seat Ibiza VDO after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia (K)
Skoda Octavia II (CAN)
Skoda Superb (K)
Skoda Roomster (K)
Skoda Scout (CAN)
Skoda Fabia (K)
VW Bora (K)
VW Beetle (K)
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer/BOSCH RB
VW Golf5 VDO (CAN)
VW Golf5 VISETEON
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5/B6 (K+CAN)
VW Polo VDO/Motometer (K)
VW Sharan (K)
VW T4/T5 VDO (K)
VW Touaran VDO (CAN)
List of vehicles covered from function security access code/login reading via OBDII:

Audi A2
Audi A3 (CAN) up to 2007 !!!
Audi A3 VDO/M73 up to 2003 (K)
Audi A4 VDO (K)
Audi A4 BOSCH (K) up to 2001
Audi A4 after 2000 - petrol engines >= 1.8
Audi A6 VDO (K)
Audi A6 (CAN) petrol engines
Audi Allroad (K) up to 2004
Audi Allroad (CAN) petrol engines
Audi A8 up to 2001
Audi A8 from 2001 to 2002 2.5TDI
Audi A8 (CAN) 2003+ petrol
Audi TT (K)
Audi Q7 petrol engines
Seat Altea (CAN)
Seat Cordoba after 1999 (K)
Seat Ibiza (VDO) after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia
Skoda Octavia II (CAN)
Skoda Superb
Skoda Roomster
Skoda Scout (CAN)
Skoda Fabia
VW Bora
VW Beetle
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer/BOSCH RB
VW Golf5 VDO (CAN)
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5 (K) B6(CAN)
VW Polo5
VW Sharan after year 2000
VW T5
VW Phaeton petrol
VW Touareg petrol
VW Touaran VDO (CAN)
PORSCHE Cayenne (CAN/K)

**gomarota** · 21st September, 2009, 07:27 AM

Its compatible with my chinese clone commander 1.4?

Thanks

**wyz1056** · 21st September, 2009, 03:32 PM

you have this interface,for crack?

**roby** · 21st September, 2009, 07:52 PM

Maybe its not compactible with chinese interface because asks for initdog dongle.

**fred83** · 21st September, 2009, 10:08 PM

c'esxcellent ce soft

**Liteace** · 22nd September, 2009, 12:05 AM

[quote=mafioso3;286250]Diagnostic via CAN and Special functions via K-line.
Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0.
Manual definition of running diagnostic session ????C not like remaining diagnostic tools always standard diagnostic session 0x89. Function is under CAN-TP2.0.
Broadcast diagnostic request ????C disable normal communication, clear DTCs, Logistic (transport) mode,.... Functions are under CAN-TP2.0.
Allows managing of brand new units (and im*obilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Functions are under CAN-TP2.0.
Most of popular diagnostic requests ????C identifications, coding, adaptations, DTCs and s.o. Functions are under CAN-TP2.0.
Special function - odometer correction in instrument clusters and EDC15x.
Special function - read Security Access Code/Login WFS.
Special function - read/program im*obilizer data.
Special function - read/write EEPROM from instrument cluster/im*obilizer. All supported clusters CAN/K.
Special function - VAG MMI TV Activation.
Special function - Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8,Porsche.
Special function - Key learning buttons for easy usage (not needed security code). Can do component security authorization.
Special function - Key learning Porsche CAYENNE (not needed security code) K+CAN.
Special function - Custom memory reading from different units like ECUs, EZS-Kessy and s.o..
Special function - Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with next update will be possible programming of flash memories
Special function - Crash data clear in airbag units
List of vehicles covered from function odometer change via OBDII:

Hi Thanks for that, what is the best interface to use with this software ?

**grezacediagnostics** · 22nd September, 2009, 12:10 AM

link
China ECU Tools Centre
thats v3.0 ebay have v2.5
V3.0 software is there also

**Liteace** · 22nd September, 2009, 12:15 AM

Originally Posted by grezacediagnostics

link
China ECU Tools Centre
thats v3.0 ebay have v2.5
V3.0 software is there also

So you have tried the China V3.0 with this software ??

Thanks
Steve

**grezacediagnostics** · 22nd September, 2009, 12:21 AM

I have dongle and software from them never tried it yet as got loads of stuff . Just need car and the time. why not download software from link i gave you and have a look pal.

Dont be like Ray say thanks

you need v3.0 interface, for v3.0 software its all on that link

**Liteace** · 22nd September, 2009, 12:24 AM

Originally Posted by grezacediagnostics

I have dongle and software from them never tried it yet as got loads of stuff . Just need car and the time. why not download software from link i gave you and have a look pal.

Dont be like Ray say thanks

you need v3.0 interface, for v3.0 software its all on that link

WTF's Ray ??????????????????