sss progman

[painless666]

Is it possible to run progman inside DIS? I have installed the DVD but I get no progman server found..

[zsolty_szasz]

Nope, sss is running on windows. You have to install to a separate PC. It requires 4 partitions.

[FrankP]

Or you need to install it on a virtual machine...

HarryCZ, what year E39 are you trying to connect to?

[suicided]

Colleagues, once again I welcome! I have established Progman V32, has changed mark for Rolls-Royce. The car sees, blocks reads. But at attempt to program the car, stops on "Measures plan is being determind" So, what's the problem?
P.S. I'm using USB adapter for programing

[zsolty_szasz]

First disable Rolls Royce support. Secondly, use power supplies, sometimes you need 2 Third use a real OPS because sometimes you need to connect MOST.

Best regards,

[suicided]

First disable Rolls Royce support. Secondly, use power supplies, sometimes you need 2 Third use a real OPS because sometimes you need to connect MOST.

Best regards,

Thanks. Do you mean online updating or jetstream? I'm already using power supply. And what about OPS - I will disagree. At programing RR the optics is not used in general! So the need in OPS is not present.

[dorf]

Hi, i?m going to install DIS AND SSS/Progman on a T30
Dis is already running may i have a problem with SSS
I know there are installations running with Dos4grub manager, so i?ll test osl2000, but i dont know how many Harddiskspace is recommended for SSS so did anyone know:
- diskspace for SSS?
- install the Bootmanager first?
- which system the GT1 use?
- is there a Bootmanager in SSS installation?

There was a recovery version of this system, but it?s gone!?

Thank you in anticipation!

[zsolty_szasz]

All I know that SSS must be installed from DVD-s. Anyway the partitions after the installation looks like this:
1. sss_progman_system c:/ 4GB
2. sss_progman_appl d:/ 34GB
3. sss_progman_install e:/ 34GB
4. sss_progman_service f:/ 1GB

Progman also are can use of GT1 for programming.
The boot manager is a generic Windows xp boot manager.

Best regards,

[imici85]

Hi
Question: if I enter the New Progman during sessions me there is only 1 menu interface is a yellow Ops head.and I can change it to see Icom interface? (E92's claimed for it that I use Icom)

[karlosso]

Hali imici85
?rn?l egy levelet a ( email removed )c?mre, hogy tudjunk besz?lni SSS r***337;l?

K?szi

[Patrian]

Hali imici85
?rn?l egy levelet a XXXXXX@XXXXXXXX.XX c?mre, hogy tudjunk besz?lni SSS r***337;l?

K?szi

Welcome on DK m8...

Some DK for you:

1st Here only in E N G L I S H!!!

2nd NEVER we posting e-mails!!!

Regards!

[supryze]

Hi
Question: if I enter the New Progman during sessions me there is only 1 menu interface is a yellow Ops head.and I can change it to see Icom interface? (E92's claimed for it that I use Icom)

Progman will recognize whatever interface is plugged into it. If you have an Ethernet network, you can run multiple sessions with multiple interfaces. Otherwise, you are restricted to whats plugged into the computer.
E92 on SSS can use either OPS or ICOM.

[ericchung]

The download file HWVER.zip is a broken file...
Can you give me a another download link?
Thanks.

[imici85]

Hello
There is an inpa K- CAN interface and working properly but Progman v32.E46 E91 ( 2006 / 3 ) this error write off



I understand that only 2007 / 3 to d -can interface.
Does anyone know what could be the problem?

[zsolty_szasz]

yes, because in youre car is newer software then in SSS. Youre SSS is outdated. For this the only choise is to use ISIS