BMW e46 Digiprog 3

[zix1]

Anybody knows how to correct milage?
Via OBD or LCM?

[gogocro]

dash ews on desk lcm some go by obd some not

[zix1]

Is there a difference of the result?
I mean which way do I choose?

[honingkoning]

Anybody knows how to correct milage?
Via OBD or LCM?

What year is your car and dash only will b Ok for this car.
But old milleage Will be traceable.

Wbr

[zix1]

Its 11/2004

Milage traceable is no deal because I changed the dash and only want to correct it to the milage.

So try over OBD or do I have to correct LCM also?

[memet99600]

Its 11/2004

Milage traceable is no deal because I changed the dash and only want to correct it to the milage.

So try over OBD or do I have to correct LCM also?

For the chip 35080 use programmer like R260 or R270+, for LCM you can use bmw scanner it's easy 1min

[zix1]

Im not sure which chip it has.
Do i have to program both, dash and lcm? Behause lcm has the right milage. Only dash is a new one.

I habe this cable for my digiprog

[honingkoning]

Its 11/2004

Milage traceable is no deal because I changed the dash and only want to correct it to the milage.

So try over OBD or do I have to correct LCM also?

If you change dash a red dot Will be Deen on the display (due to different vin in dash) for milleage you can remove eep and change with digi.
But for change vin you need programmer like upa/xprog/R270 etc.

Wbr

[memet99600]

If you change dash a red dot Will be Deen on the display (due to different vin in dash) for milleage you can remove eep and change with digi.
But for change vin you need programmer like upa/xprog/R270 etc.

Wbr

Or you can read, save, upload here and tell VIN and mileage. Someone can change for you. ANd after write in you new chip with digi .

[captain crackers]

The vin can be changed using a Digiprog. Arthur.

[zix1]

But to change vin via digiprog i need to desolder the Chip, right?

[zix1]

My e46 from 2004 doesnt have a port left from the engine. Thats weird. I only have an obd port inside the car.
Digiprog wants to have ST06. Thats the round cable.
do i have to choose e90 insted? Because of the odb Port.

[memet99600]

My e46 from 2004 doesnt have a port left from the engine. Thats weird. I only have an obd port inside the car.
Digiprog wants to have ST06. Thats the round cable.
do i have to choose e90 insted? Because of the odb Port.

You can't do it via OBD you need to modify chip in dash (kilometer and VIN)

[brend]

Anybody knows how to correct milage?
Via OBD or LCM?

Ews only manual adjustment .Obd not have sulution .

[zix1]

Chip in dash or lcm? Or both?