BMW e46 Digiprog 3

**zix1** · 8th February, 2017, 10:33 PM

Originally Posted by Alawigmx

Ive only done E46's using Digimaster, just removing cluster and LCM, clearing/resetting LCM, then read/adjust mileage 35080 erase and then finally write. Works flawlessly, I mostly use Digiprog for OBD odometers in VAG cars.

Everything possible with Digiprog to. Why using an extra tool.

**zix1** · 9th February, 2017, 09:09 AM

But back to topic!
Digiprog manual says using ST51 for 2004 BMW LCM.
It has 1x brown, 1x white, 1x green, 1x yellow.

My delivered ST51 only has brown, white and 2 ihrer colors.

Any suggestions?

**clusters** · 9th February, 2017, 09:23 AM

Yes, rewire it to correct colors

**zix1** · 9th February, 2017, 10:01 AM

Clusters from cartech uk?

Helped me another time haha

**zix1** · 9th February, 2017, 05:36 PM

Everything Right?

Brown=brown
Black=white
Red=yellow
orange=green

**honingkoning** · 9th February, 2017, 10:53 PM

Zix1 this topic with this 36 reactions and 1 Thanks (not by you).
You got so much info and help bad situation mate.

Wbr

**zix1** · 9th February, 2017, 11:10 PM

LOL? I thanked Cluster instantly via button. Better check it before you say something like that.
Everything before was just discussing without any solution. Not to forget that most of the comments to ascii were wrong.
But hey, no problem mate.

Have a nice day.

**diagtech** · 10th February, 2017, 12:29 AM

Lcm should go diag

**zix1** · 10th February, 2017, 11:24 AM

I will try it saturday. Hope the wiring is right. I wasnt sure if cluster mean the front or the back side where the soldering is.
Because pin 13 on the upper right backside is not pin 13 on the upper right frontside but its bottom right.

**zix1** · 10th February, 2017, 03:17 PM

Another question:
What is the difference between LCM with ST51 (HCS12), ST51 (HC12) and LCM with ST35 (HC11)

**zix1** · 11th February, 2017, 12:44 PM

LCM Hc12 worked on Digiprog but dash still display old milage. Why?

**vageric** · 11th February, 2017, 01:42 PM

42 post and we still on post #1.
i think is best you let someone els do this for you.

**honingkoning** · 11th February, 2017, 01:42 PM

Originally Posted by vageric

42 post and we still on post #1.
i think is best you let someone els do this for you.

I think its better to ban this topic.

**zix1** · 11th February, 2017, 01:50 PM

Yes, because except of clusters post, nothing else answers any questions. People are here to learn and discuss but some of you take it as an opportunity to hate.
Have a nice day.

**vageric** · 11th February, 2017, 03:50 PM

Originally Posted by zix1

Yes, because except of clusters post, nothing else answers any questions. People are here to learn and discuss but some of you take it as an opportunity to hate.
Have a nice day.

in this whole thread i see in different post repeatedly the right anwser.
but the only thing i read from you is OBD and LCM.
read the whole thread again and your will find your anwser.
and learing and have someone tell you in details how to do it is not the same.
otherwise read more post on DK and you will learn!