I got same problem as before Always stuck on 0
I am using a hardware serial com port not the usb com port
RNS510_code_finder_ver2_2_i0KXjwE010.jpg
And in taskmanager it shows cpu is clearly being used but no code
Taskmgr_y604k1uHWo.jpg
Sorry? I don't quite understand what you are saying..
Thank you for your software
Password found successfullyIMG_2865.JPG
Hello
I have a problem with my
RNS 510 code because it has been asked in the car for some time, unfortunately I no longer know this, I connected it as shown in the program it was just that i either connected it wrong or the wrong cable i'm not sure i took the rs232 to usb and the laptop is a sony with windows 8 the program is such that i can select the com port but it stays on start it stock at 0 and does not count further. I would be very happy about help
Thanks, Claudio for this awesome software.
It worked for me with a Windows 10 laptop and USB to RS232 adapter cable after swapping TX and RX (was stuck on count 0)
AC1966 (15th June, 2023)
Great tool
Do you think you could share the source code?
I heard that I have to use real serial port, not USB
Do you maybe know why? I thought RNS510 only uses RX/TX lines not CTS/RTS lines
Works like a charm👍
Hello please its will be possible to post here what cable using when you have only usb i found only ttl versions thanks in advance for any answer
sorry for double post
Bookmarks