Audi A3 2013 8V Bi-Xenon Headlights refiting need help

[MOHCIN2]

Hi my friends, i have change a halogen headlight to new one Bi-Xenon in an Audi a3 2013 8V, i have convert the 10 pin to 14 pin but turn signal 11 of the two headlight must go to the central elect unit i don't have where or witch connector in that unit must hing on the two wires and need help to perform a coding to be ok the light of low beam flashed, please help.

[rob h]

make sure that your bcm support these new lights.
A highline bcm will do. If not, exchanging the bcm requiers a component security adaptation by a dealer.
And reprogramming of the remotes.
As for coding, read it from a similar equiped car, and compare the data with a hex editor.
And download elsawin, it will show you the pinouts.

[MOHCIN2]

hi again in [09] Central Electronics -> coding -> long coding helper say bi xenon activation not compatible with that unit
but i think its posible in adaptation because is there a lote of function there see attached

[Peto Pedro]

Hey guyz
I just googled dis thread and I want to do the upgrade I have purchased LED headlights for mine audo a3 2015 tdi quattro 2.0
If anybody could help what is the procedure and what everything I need to do ?
Thnx