Peugeot 407 JCI BSI

[checka]

Hi everyone. FVDI killed my BSI. Try to read PIN from BSI and now car is totally dead (nothing not working). Need help.
BSI JCI
96 640 590 8001
BSI04EV K04-00 081107
BOOT 28120836-4
HARD 28119248-3 B
1 witch pinout work for this BSI to read and write with FVDI
2 How can I read this BSI(programmer)?
3 Need a virgin dump.
4 I need to read motor ecu for PIN?

And one ques. it normal for corrupted BSI no ACC, no IGN, not working anybody (cluster, key) totally dead

[checka]

With another fvdi. newer witch can read dump from this BSI. have read this dump. then I read PIN become message "erased BSI detected" Have anyone virgin dump?P407BSIDUMP.rar

[dragon100]

Read eeprom from bsi to virgin ...yes if bsi damage, silence with all :-) or use virgin file from other bsi (same numbers) ....change km in dump because over 300000km ...

[checka]

Read eeprom from bsi to virgin ...yes if bsi damage, silence with all :-)

my dump it is Flash or eeprom? I can read eeprom without problems, but what read FVDI?

[dragon100]

You need read eeprom from bsi or ecu to extract pin, then use virgin dump from me and reprogram bsi and keys and start the car ...

[checka]

Here is eeprom 95128BSIEEPROM.rar

[rokibar]

Here is eeprom 95128BSIEEPROM.rar

your eeprom looking ok. stored vin and pin code. most possible your fvdi damage flash. just find proper flash for your bsi, write tham and start the car.

[checka]

Have anyone flash?

[dragon100]

Try your virgin dump if not try my previous file. Your pin from bsi X7NT or reverse TN7X ...

[teamtuner]

maybe this can help you?
https://mega.nz/#!MIAVhShC!NfYXgmhKYZ2i6giI4jdggm2CXxn7mRKoTfRd2b7 EKU4

[checka]

no luck with than dump, still nothing happened.

[teamtuner]

if you are lucky...reflash flash with one of the bsi flash from mega
write all eeprom FFFFFFFF
if pin key is ok,use diagbox to recode all bsi and keys...select the gearbox automatic or not...

[checka]

witch one ggod for me?
BSI JCI
96 640 590 8001
BSI04EV K04-00 081107
BOOT 28120836-4
HARD 28119248-3 B

[teamtuner]

try one...if bsi return to live,you will recode what need inside

[just4upal]

i read that if you read your bsi on bench with fvdi it well repair it, just tray read it on bench