odometr correction in alfa 156 TS M1.5.5

**euroscan** · 7th October, 2009, 07:10 PM

how to make odometr correction in alfa 156 TS ECU M1.5.5.
- this ECU is hybrida, i know how to make boot, erase im*o key
- but how to make correction don't know in this time.
- this info about mileage is exist in eeprom 24c16 ( on hybrida module )
- looking, need all message !!!
--

--
- hybrida, eeprom 24c16

**biktel** · 15th October, 2009, 08:32 PM

Originally Posted by euroscan

how to make odometr correction in alfa 156 TS ECU M1.5.5.
- this ECU is hybrida, i know how to make boot, erase im*o key
- but how to make correction don;t know in this time.
- this info about mileage is exist in eeprom 24c16 ( on hybrida module )
- look for all message.
--

--
- hybrida, eeprom 24c16

Please tell me how can I read a motronic 1.5.5 ecu from Alfa Romeo 156, 2.0TS (1999). I have 1260 galetto, but I can read the original eeprom, becouse the READ ECU botton is inhibeted.

Ths

**euroscan** · 17th October, 2009, 05:51 PM

sorry, but i don't write " I read eeprom, I read flash ECU", this is imposible.
- ECU's flash is only writeable.
- from galletto , before boot, and after boot ECU.

--

--

**biktel** · 18th October, 2009, 03:52 PM

Originally Posted by euroscan

sorry, but i don't write " I read eeprom, I read flash ECU", this is imposible.
- ECU's flash is only writeable.

Thanks man

gjpadron · 27th October, 2010, 03:52 PM

Dear sirs:

Please, I need the dump for the 24C16 into the hybrida M1.5.5 Alfa Romeo.

?May be somebody have it?

Would you please, post it?

Thanks in advance.

GJPadron

Originally Posted by euroscan

how to make odometr correction in alfa 156 TS ECU M1.5.5.
- this ECU is hybrida, i know how to make boot, erase im*o key
- but how to make correction don't know in this time.
- this info about mileage is exist in eeprom 24c16 ( on hybrida module )
- looking, need all message !!!
--

--
- hybrida, eeprom 24c16

**Autronic** · 28th October, 2010, 04:03 AM

Hi Guy

For this ecu you have need the M1.5.5 boot dll for KWP2000, the program read and write the eeprom on this ecu in boot mode.

Regards
Fab

gjpadron · 28th October, 2010, 07:16 PM

Ok. Thanks a lot. I'll try to do that.
Best regards.

GJPADRON

Hi Guy

For this ecu you have need the M1.5.5 boot dll for KWP2000, the program read and write the eeprom on this ecu in boot mode.

Regards
Fab[/QUOTE]

**alfaskorpion** · 24th December, 2010, 02:57 PM

Originally Posted by euroscan

sorry, but i don't write " I read eeprom, I read flash ECU", this is imposible.
- ECU's flash is only writeable.
- from galletto , before boot, and after boot ECU.

--

--

what program is in the picture? use it with the Galletto? Looks like me
KWP2000 on but if he can work with Galletto?
I need to be able to see if m1.5.5 entered the boot
mode.