Maybe the column needs to be a Virgin?
Hello all
Trying to get a 2012 focus steering column to sync (key-less model)
Vehicle has had used replacement column fitted, right away car start and drive, turn ignition off vehicle, lock engaged now cannot start vehicle cannot get lock off
Tried all i can think of to learn,
erased keys programmed keys.......
Replaced bcm and coded to car (pats and as built flash)
has anybody else done one?
DTCS
in bcm i get B1026 steering column lock, bad signal/message failure fault currently present
and b10da pats target identifier fault currently present
and B12CD voltage control module, missing message fault currently present
thinking now only a new column lock from ford can be programmed like a one time program when in virgin state
Last edited by norman1967; 24th June, 2017 at 11:33 PM.
Genuine tools including Abritus, Autotuner Master, Bosch Ford vcm2, smok UCDS FULL JTAG FULL pcm flash, IO terminal, UPA, Autel maxicom pro, MTX dpf, dtc, immo edc17 UCDS, and a little well maintained hairy box from china I play inside!
4.94 x100 fgtech kess ktm ktag mpps skp. And still collecting
Maybe the column needs to be a Virgin?
Genuine tools including Abritus, Autotuner Master, Bosch Ford vcm2, smok UCDS FULL JTAG FULL pcm flash, IO terminal, UPA, Autel maxicom pro, MTX dpf, dtc, immo edc17 UCDS, and a little well maintained hairy box from china I play inside!
4.94 x100 fgtech kess ktm ktag mpps skp. And still collecting
Hi
Ford is sensitive to the voltage drop in the battery,check if it did not fly synchronization,In the security tab you will have to add a key, synchronize bcm-ecu-elv,only you will need incode from this you can not go back as long as you do not follow the code you will go back will be different.
IF I HELP Don`t forget to use Thanks button and reputation
norman1967 (26th June, 2017)
yes ... try the "module initialization" inside PATS.
foks025 (26th June, 2017)
gazooo (5th August, 2019), morfej (14th August, 2017), motohacker84 (21st August, 2018)
thanks already solved
Hello, how did you solve the problem? I have the same error B1026, the coding pats is only online in IDS
waldi
Bookmarks