Newbie need your help

[fady eid]

hello I need somebody to answer this questions as I am a newbie and going to work with many PSA cars this days

now I have got a huge number of bsi , ecu , transponder chips they need to be matched together so , I have ( fg galetto , tl866 , zedbull , xprog )

1) is there a way to read the transponder chip id46 to know the code inside to match it to bsi + ecu

2) is there any problem to match any bsi to any ecu ( same car model ) ??

3) could I do this job on bench and test it ? or need to connect it to car to code the keys with bsi

sorry for this big questions

[hk06]

read eprom of the bsi . find pin and you can programme key with pps tool. if you want to change bsi read eprom from old and write in the new

[autobo]

What exactly you want to do?

[fady eid]

I have a lot of different bsi + ecus + used transponder chips , I need to match them together

[tehnosoftex]

Used transponders cant help you. You will need to read the eeprom from ecu and from bsi , find the pin and insert into ecu eeprom. After that you can match them on a car using the dealer tool lexia to program a new chip and match the ecu with the bsi

[fady eid]

yes , so for that I asked is there a way to read the code on a used transponder chip so I match it with bsi + ecu so I could save many trasnp.chips ?!

[CHIKO]

HI
1/ NO YOU CAN NOT READ THE PIN FROM THE KEYS ONLY OLD CAR WITH T5 CHIP (FIXED CODE)
2/NO PROBLEM TO MATCHE THE ECU+BSI+KEYS
3/SAME MODEL YES ATHER NO
COOD LUCK

[fady eid]

so thank u all for help , but now I know If I have a faulty bsi I need to replace it by same H.W / SW right ?

what should I do in my case ?!

[CHIKO]

HI YES YOU NEED THE SAME HW/SW
GOOD LUCK

[fady eid]

so now what could happen if i replace bsi with another one different HW ?

[CHIKO]

HI YOU WILL FOND THAT SOME OPTION ORF CAR DONT WORK / CAR DONT START..................
BUT IN SAME MODEL NO PROBLEM
GOOD LUCK