About VCDS 908

[spaske]

When you connect to internet ,software automaticly connects to ross tech server, updates list of cloned serial numbers and sends command to Atmel inside interface to erase first few bytes of 93c46 eprom( attached to ft232bl) and erase few lines in Atmel.. so it doesn;t "kill" the interface... you must reprogram Atmel and 93c46 , and it will work... First symptom of "killed" interface is that windows doesn't recognize it and won;t accept drivers... another symptop is LED blinking RED colur only..
Chinese tred to fix that with some IC inside that "fixes" that ,but ofcourse, they failed... Their ,so called " never locks " interfaces work terrible and very unstable... With regular ,good hardware , you can do what you want to inteface...disconect in middle of working, unplug, plug, start the car in middle of measurnig blocks and it will always "come back" and reconnect itself in few sec. ...never freezes

[z786]

isnt dat abit expensive for a clone?????????

[spaske]

export price is lower beacuse it doesn't include teh.support over the phone. Still , I am not chinese, I make every VCDS interface by hand, I test it minimum 2-3 hours on EDC15 and EDC16 ECUs . You can always make it yourself if price is to high for you

[tk500]

When you connect to internet ,software automaticly connects to ross tech server, updates list of cloned serial numbers and sends command to Atmel inside interface to erase first few bytes of 93c46 eprom( attached to ft232bl) and erase few lines in Atmel.. so it doesn;t "kill" the interface... you must reprogram Atmel and 93c46 , and it will work... First symptom of "killed" interface is that windows doesn't recognize it and won;t accept drivers... another symptop is LED blinking RED colur only..
Chinese tred to fix that with some IC inside that "fixes" that ,but ofcourse, they failed... Their ,so called " never locks " interfaces work terrible and very unstable... With regular ,good hardware , you can do what you want to inteface...disconect in middle of working, unplug, plug, start the car in middle of measurnig blocks and it will always "come back" and reconnect itself in few sec. ...never freezes

the first things are not partly true ...

for the Chinese cables - it's true
on 812 it is unregistered after few min
currently they do not have cables for version after 805.1

[MOBILTRONIC]

Spaske,Spaske,...

[spaske]

Mobiltronic, Mobiltronic,.....

[z786]

I am not chinese, I make every VCDS interface by hand

Dont tel me the chinese hav some special technology in which things are done without using hands

im only jokin, dnt worry

wats best price in GBP???

[ivica21]

I buy vcds 908 from spaske and they work perfect.I have one of china version and some functions not work.

[zecas]

I buy vcds 908 from spaske and they work perfect.I have one of china version and some functions not work.

bonito bonito

[MOBILTRONIC]

Ivica21,Ivica21,...hm???

[z786]

Spaske,Spaske,...

Mobiltronic, Mobiltronic,.....

bonito bonito

Ivica21,Ivica21,...hm???

Am i missing something here??

[vares]

Stop the Flooding!!!!
It's that advertising adapter Spaske?
If you have nothing to say on the merits, it is better not to say anything.

[zcc]

Perhaps this one : Spaske's VCDS 908

The original would be almost the same price.

[MOBILTRONIC]

You good says,VARES!

[z786]

The original would be almost the same price.

Defies the point of buying a clone