Look in ur Inbox.
If someone need it. so text me
Look in ur Inbox.
If someone need it. so text me
KESS 5.017 v2.22/3
CHEVROLET ORLANDO DCM3.7AP
HW 018056D9AA
SW 01805654AD
The protocol does not support reading
Hi
have anyone cd uploaded from Kess v2 5.017 ?
or hav anyone firmware from kess to reprogramm NXP with J-Link ?
Thanks
motorsport (9th May, 2019)
Someone try with truck?
We have Full Solution ecu Read/Write DCM3.7AP
Eprom Flash with DPF Off Working
and How Reset DPF Soot Level
Full info
DCM3.7AP is very difficult Ecu
Never try to read this one with a clone
AUTOTUNER, FLEX ,X17, TRASDATA / NEW GENUIS AND ALIENTECH MASTER OWNER.
FULL SWIFTEC AND EVC RESELLER
FILE SERVICE FROM 8AM - 9PM 7/7
BAPRO 4WD DYNO
danielectronic (17th March, 2019)
I have a Kess v2 5.017 running ksuite 2.47 my issue is I’ve mapped a few cars with no problems but I’ve been trying to do a friends old combo van with a delco 1700dti Euro3 ecu it will allow me to read it fine and asks me to save the file but once I save it checksum error pops up and when you click ok it says unrecoverable error program must restart
many ideas anyone
it's no problem read and write by obd for BMW EDC16. but i having checksum error when write for toyota Vios.
Let me write a Siemens 29f200b and it says check
I can read the Chinese kess flash from opel vectra z19dth edc16c39? Will there be any better programmer from him?
kess chinese I kill my ecu, hello guys try reading ecu mjd 8f3 d7 with chinese kess now ecu does not communicate with diagnosis and appears on board "no fps" also immo light does not turn off now the car does not start someone knows what could happen thanks mates
Read Ecu again. It will start . Aslong as you didn’t write and only read. Slow speed down read again
Any one know if Kess v2 5.017 2.47 can write med17.5.25 obd without problems thanks
Bookmarks