2014 Mitsubishi Mirage KOS

[lordcurtron]

Hey guys,

This is my first post, so please forgive me if this has been answered elsewhere.

I stumbled upon an 08/2014 Mitsubishi Mirage with Start/Stop button, NOT twist prox. All keys lost. I couldn't seem to program a new key diagnostically using Zed-FULL or MVP.

Looking at the Tango, it has ASX and Outlander listed. I've removed the KOS which is very similar looking to the pictures in Tango, but doesn't have the 24C16 package in the same place or anywhere on the circuit board.

On this KOS unit (part number 8637B363) there's a small 8 leg EEPROM with A320 written across it. I've removed it and it's read up (on the TMPro) as a 95320. Photos and bin file are attached.

Just wondering if anyone has had a crack at these before, or if it's not supported. Any help would be greatly appreciated.

[mojomojo]

Zed full does it but you need to download mitsubishi immo file.

I just stumbled on "lost key" situation...Adding a key is not a problem( done over 5 already) but when you have no keys it becomes a problem.

I am currently looking for solution.

https://www.youtube.com/watch?v=FyjSptEazI8

[Slem]

Hi ..

you can start the car with TANGO .. check the below

1- read the micro eeprom A320 as 24C16 using any programmer
2- make anew key using outlander 2011 24C16 option and transponder PCF7952
3- give attention to the TANGO note :

Remote functions
Remote functions have to be matched via OBD.
Make PCF7952 key with Tango. Put the key to the key slot and re-learn this key with
a diagnostic equipment, as example it maybe MUT-III, G-SCAN, etc.


The generated transponder can ign ON and start the car .. use it to ign ON and add the OEM smart key .. it will work with all functions


Slem

[mojomojo]

Hi ..

you can start the car with TANGO .. check the below

1- read the micro eeprom A320 as 24C16 using any programmer
2- make anew key using outlander 2011 24C16 option and transponder PCF7952
3- give attention to the TANGO note :

Remote functions
Remote functions have to be matched via OBD.
Make PCF7952 key with Tango. Put the key to the key slot and re-learn this key with
a diagnostic equipment, as example it maybe MUT-III, G-SCAN, etc.


The generated transponder can ign ON and start the car .. use it to ign ON and add the OEM smart key .. it will work with all functions


Slem

what module am I reading this eeprom from?

[Slem]

Smart box as shown in Tango maker (outlander)

[Niaz]

Hey guys,This is my first post, so please forgive me if this has been answered elsewhere.I stumbled upon an 08/2014 Mitsubishi Mirage with Start/Stop button, NOT twist prox. All keys lost. I couldn't seem to program a new key diagnostically using Zed-FULL or MVP.Looking at the Tango, it has ASX and Outlander listed. I've removed the KOS which is very similar looking to the pictures in Tango, but doesn't have the 24C16 package in the same place or anywhere on the circuit board.On this KOS unit (part number 8637B363) there's a small 8 leg EEPROM with A320 written across it. I've removed it and it's read up (on the TMPro) as a 95320. Photos and bin file are attached.Just wondering if anyone has had a crack at these before, or if it's not supported. Any help would be greatly appreciated.

Hello every body i need Mitsubishi mirage KOS unit with two or one working key i search on eBay but unsuccessful please if somebody have can pm me detail i really appreciate .. KOS unit must be from a USA,Europe car in other way if some one have car in his garage/place then eeprom & code flash also helps Thanks

[mojomojo]

I'm going to buy the Tango specifically for these vehicles since they're becoming very common in my market area

That being said have you tried this yourself? Slem

[mojomojo]

Hello every body i need Mitsubishi mirage KOS unit with two or one working key i search on eBay but unsuccessful please if somebody have can pm me detail i really appreciate .. KOS unit must be from a USA,Europe car in other way if some one have car in his garage/place then eeprom & code flash also helps Thanks

hei niaz, regarding the private message you sent me what exactly did you try that does not from this post

[Niaz]

Hi ..

you can start the car with TANGO .. check the below

1- read the micro eeprom A320 as 24C16 using any programmer


Slem

hei niaz, regarding the private message you sent me what exactly did you try that does not from this post

First i am thinking how to read a spi eeprom using 12c connection ? then i just make first poster file 4kb to 2kb but tango not recognize file !
Because Slem procedure is for old models haitag2 key this one is hitage 3 .

[flc216]

any one try to read as 24c16 the a320 chip i try with no esponse only can read as 95320

[hcip]

any one try to read as 24c16 the a320 chip i try with no esponse only can read as 95320

24C14 is a 12C eeprom and 29320/25C320 is SPI, it is different type to each other...

[ibratex]

DIDI YOU SOLVE THE SITUATION I HAVE THE SAME HERE

[lordcurtron]

Sorry about the delayed message.

I ended up sending this vehicle to the dealer as I couldn't find a solution for it at the time. The Part Number of the key was 8637B330 if it's of any help.